| 烧结法合成镁铝尖晶石熟料工艺条件的研究 |
| |
| 引用本文： | 戴晓光,汪厚植.烧结法合成镁铝尖晶石熟料工艺条件的研究[J].武汉科技大学学报(自然科学版),1989(2). |
| |
| 作者姓名： | 戴晓光 汪厚植 |
| |
| 作者单位： | 武汉钢铁学院无机非金属材料教研室，武汉钢铁学院无机非金属材料教研室 |
| |
| 摘 要： | 作者对用二步煅烧法准备致密镁铝尖晶石熟料的工艺条件进行了研究。结果表明,控制合理的工艺参数,可制得体积密度大于3.3克/cm~3,显气孔率小于5%的镁铝尖晶石熟料。
|
| 关 键 词： | 镁铝尖晶石 轻烧料 熟料 |
THE STUDY OF THE TECHNICAL CONDITIONS ON SYETHESISING SINTERND MAGNESIUM AIUMINATE CLINKS |
| |
| Dai Xiaoguang Wang Houzhi.THE STUDY OF THE TECHNICAL CONDITIONS ON SYETHESISING SINTERND MAGNESIUM AIUMINATE CLINKS[J].Journal of Wuhan University of Science and Technology(Natural Science Edition),1989(2). |
| |
| Authors: | Dai Xiaoguang Wang Houzhi |
| |
| Institution: | Dai Xiaoguang Wang Houzhi |
| |
| Abstract: | In the paper,the technical conditions are studied to produce dense magnesium aluminate clinkers in the way of sfep firing.The reswlt shows that sintered magnesium aluminate clinkers with more tha 3.3 g/cm~3 bulk density and less than 7% apparent porosity can be obtained by controlling technical parameters. |
| |
| Keywords: | Magnesium-aluminate spinel Sintering charge composition Clinker |
| 本文献已被 CNKI 等数据库收录！ |
