首页 | 本学科首页   官方微博 | 高级检索  
     

单纤维抽拔理论模型和实验验证
引用本文:刘让同,严灏景,储才元. 单纤维抽拔理论模型和实验验证[J]. 东华大学学报(自然科学版), 1997, 0(6)
作者姓名:刘让同  严灏景  储才元
作者单位:中国纺织大学纺织学院,中国纺织大学纺织学院,中国纺织大学纺织学院 上海,200051,上海,200051,上海,200051
基金项目:国家自然科学基金(59473004)资助论文
摘    要:单纤维抽拔的分析模型有两种:基质完全包埋纤维和基质呈点状粘结纤维。针对后者研究的不足,提出了多粘结点的抽拔模型。纤维从多个粘结点中的抽拔力并不是所有粘结点单个作用时抽拔力的加和;纤维上粘结点的增加,抽拔力将增加,但存在一个增长极限,过量的粘结点对抽拔力并没有贡献;由于纤维只具有有限的强力,存在一个临界粘结点数,该值主要与粘结点的粘结长度有关。

关 键 词:粘结力  模型  抽拨力  界面  多粘结点  临界粘结点数

Theoretical Model and Experimentation of Single Fiber Pull-out Behavior from Multi-bond System
Liu Rangtong,Yan Haofing,Chu Caiyuan. Theoretical Model and Experimentation of Single Fiber Pull-out Behavior from Multi-bond System[J]. Journal of Donghua University, 1997, 0(6)
Authors:Liu Rangtong  Yan Haofing  Chu Caiyuan
Abstract:There are two analytic models of single fiber pull-out behavior: fiber embeddea by matrix completely and fiber bonded by binder in point state. Study on the latter is few now,therefore, a model of single fiber pull-out behavior from multi-bond system is put forward in this paper. The pull-out force from multi-bond system is not equal to the sum of all the pull-out force drawing from each bond lonely, it will increase as the bond number on one fiber increase, however, there exists a limit, the overnumber of bond is useless to contribute to the force of pull-out force. Moreover, there exists a critical number of bond on each fiber because of the limited tenacity of fiber, this value depends on the embedded length of the fiber.
Keywords:bond stress   model interface   pull-out force   multi-bond system   critical number of bond
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号