| 薄壁零件高速铣削稳定性的分析 |
| |
| 引用本文： | 薛小强,柳大虎,马兆允.薄壁零件高速铣削稳定性的分析[J].南京工程学院学报(自然科学版),2008,6(3):29-33. |
| |
| 作者姓名： | 薛小强 柳大虎 马兆允 |
| |
| 作者单位： | 1. 南京工程学院机械工程学院,江苏,南京,211167;南京航空航天大学机电学院,江苏,南京,210016
2. 南京航空航天大学机电学院,江苏,南京,210016 |
| |
| 基金项目： | 江苏省重点实验室基金，南京工程学院校科研和教改项目 |
| |
| 摘 要： | 针对薄壁零件在铣削加工过程中存在的切削颤振问题，建立了铣削颤振理论模型，进行模态分析试验和铣削加工试验．获取系统动态性能参数和铣削力系数．在此基础上建立了薄壁结构零件铣削加工的稳定性耳瓣图，为今后的薄壁零件加工稳定性研究工作打下了基础．
|
| 关 键 词： | 薄壁零件 高速铣削 切削颤振 |
Analysis of Stability Regarding High Speed Milling of Thin-wall Parts |
| |
| XUE Xiao-qiang,LIU Da-hu,MA Zhao-yun.Analysis of Stability Regarding High Speed Milling of Thin-wall Parts[J].Journal of Nanjing Institute of Technology :Natural Science Edition,2008,6(3):29-33. |
| |
| Authors: | XUE Xiao-qiang LIU Da-hu MA Zhao-yun |
| |
| Institution: | XUE Xiao-qiang1,2,LIU Da-hu2,MA Zhao-yun1,2(1.School of Mechanical Engineering,Nanjing Institute of technology,Nanjing 211167,china,2.College of Mechanical , Electrical Engineering,Nanjing University of Aeronautics , Astronautics,Nanjing 210016,China) |
| |
| Abstract: | As to the problem of cutting chatter found in the course of thin-wall parts' milling,a theoretical model with regard to milling charter was established to conduct modal analysis experiments and milling experiments with a view to obtaining dynamic performance parameters of the system and milling force coefficient.In doing so stability lob graph for milling thin-wall parts was drawn,thus laying a sound foundation for further research work in this area. |
| |
| Keywords: | thin-wall parts high speed milling cutting chatter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
