首页 | 本学科首页   官方微博 | 高级检索  
     

宽带平衡式低噪声放大器的研究与设计
引用本文:刘文豹,杨自强,陈涛. 宽带平衡式低噪声放大器的研究与设计[J]. 应用科技, 2014, 0(1): 22-25
作者姓名:刘文豹  杨自强  陈涛
作者单位:电子科技大学电子工程学院,四川成都611731
基金项目:国家自然科学基金青年科学基金资助项目(61006026)
摘    要:为解决低噪声放大器设计时带宽和驻波的问题,提出一种结合平衡放大结构和负反馈技术设计宽带低噪声放大器的方法。采用ATF38143晶体管,利用ADS软件对其进行匹配优化,以自偏压的形式提供负压简化电路,通过并联谐振电路调节增益平坦度,设计出一个工作在1.5~2.5 GHz内、端口驻波小于1.4,噪声系数优于0.55、最大增益大于14 dB、带内增益平坦度优于2 dB的宽带低噪声放大器,很好地解决了低噪声放大器的带宽和驻波问题。

关 键 词:平衡放大  负反馈  宽带  低噪声放大器  噪声系数

Research and design of the broadband balance type low noise amplifier
LIU Wenbao,YANG Ziqiang,CHEN Tao. Research and design of the broadband balance type low noise amplifier[J]. Applied Science and Technology, 2014, 0(1): 22-25
Authors:LIU Wenbao  YANG Ziqiang  CHEN Tao
Affiliation:( Institute of Electronic Engineering , University of Electronic Science and Technology, Chengdu 611731, China)
Abstract:In order to eliminate the defects of band width and standing wave in the design of a low-noise amplifier, a design method for a broadband low-noise amplifier by combining balance amplification structure and negative feedback technology was proposed. ATF38143 transistor was applied, ADS software was used for matching and optimizing the transistor, a simplified circuit for negative voltage was provided in self-biasvoltage, and a parallel-connection reso-nance circuit was utilized to regulate the gain flatness. Finally, a broadband low-noise amplifier was designed, which works under 1.5-2.5 GHz, with standing wave at port less than 1.4, noise coefficient more than 0.55, the maximum gain above14 dB and the gain flatness inside band more than 2 dB.
Keywords:balance amplification  negative feedback  broadband  low-noise amplifier  noise coefficient
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号