首页 | 本学科首页   官方微博 | 高级检索  
     

并行片上网络仿真器ParaNSim的设计及性能分析
引用本文:唐轶轩,吴俊敏,陈国良,朱小东,胡蝶. 并行片上网络仿真器ParaNSim的设计及性能分析[J]. 西安交通大学学报, 2012, 0(2): 24-30,82
作者姓名:唐轶轩  吴俊敏  陈国良  朱小东  胡蝶
作者单位:中国科学技术大学计算机科学与技术学院;中国科学技术大学苏州研究院
基金项目:国家高技术研究发展计划资助项目(2008AA01Z111);IBM大学合作联合研究项目(JSA200906010);中央高校基本科研业务费专项资金资助项目(WK0110000020)
摘    要:为了减少使用仿真器对片上网络的性能、结构等进行仿真的时间,提高仿真效率,利用当代计算机的并行计算能力,设计并实现了一个并行片上网络仿真器ParaNSim.该仿真器可配置拓扑、路由算法以及虚通道等参数,既可以作为独立的仿真器使用,也可以作为一个子模块嵌入其他仿真器(如Multi2Sim)中;经过实验验证,其并行仿真能达到的加速比平均约为210%,最大加速比可达250%,因此它能有效地减少仿真时间,为大规模片上网络的仿真提供支持.

关 键 词:仿真器  并行仿真  片上网络

ParaNSim: a Parallel Network-on-Chip Simulator
TANG Yixuan,WU Junmin,CHEN Guoliang,ZHU Xiaodong,HU Die. ParaNSim: a Parallel Network-on-Chip Simulator[J]. Journal of Xi'an Jiaotong University, 2012, 0(2): 24-30,82
Authors:TANG Yixuan  WU Junmin  CHEN Guoliang  ZHU Xiaodong  HU Die
Affiliation:1(1.School of Computer Science and Technology,University of Science and Technology of China,Hefei 230027,China; 2.Suzhou Institute for Advanced Study,University of Science and Technology of China,Suzhou,Jiangsu 215123,China)
Abstract:It is a very popular approach to use simulators to evaluate the performance and cost of different network-on-chips(NOCs) for determining the best network designs and configurations.Most of the traditional simulators are of single thread,which is a computational bottleneck of these simulators because single thread renders them cannot take advantages of new chip multiprocessors.A parallel NOC simulator,ParaNSim,is designed and implemented in this paper.The simulator supports large-scale NOC simulation,and can effectively reduce the simulation time for large-scale NOC simulation.Experimental result shows that the speedup of parallel simulation can reach 210% on average,and 250% the maximum.
Keywords:simulator  parallel simulation  network-on-chip
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号