首页 | 本学科首页   官方微博 | 高级检索  
     检索      

PFS盐基度与絮凝性能关系分析
引用本文:洪金德,丁淼.PFS盐基度与絮凝性能关系分析[J].华侨大学学报(自然科学版),2005,26(3):303-305.
作者姓名:洪金德  丁淼
作者单位:华侨大学材料科学与工程学院,福建,泉州,362021;华侨大学材料科学与工程学院,福建,泉州,362021
摘    要:通过分散和活性染料染色废水絮凝处理实验.探讨聚合硫酸铁(PFS)的盐基度与其絮凝性能之间的关系.结果表明.在适宜的pH值和投加量条件下,聚合硫酸铁的盐基度在10%~16%时。絮凝效果较好,色度去除率为80%以上.当PFS盐基度为13.43%时。处理效果最好.色度去除率达95%。

关 键 词:PFS  盐基度  絮凝性能
文章编号:1000-5013(2005)03-0303-03

Analysing the Relation between Akalinity of Polymericed Ferri Sulfate and Flocculation Performance
Hong Jinde,DING Miao.Analysing the Relation between Akalinity of Polymericed Ferri Sulfate and Flocculation Performance[J].Journal of Huaqiao University(Natural Science),2005,26(3):303-305.
Authors:Hong Jinde  DING Miao
Abstract:Through flocculation treatment of wastwater dyeing by dispersed and reactive dyestuff, the authors inquired into the relation between alkalinity of polymerized ferri sulfate (PFS) and flocculation performance. The results showed that, a good flocculation effect with more than 80% decoloration was obtained under the condition of appropriate pH value and input dosage and also 10%~16% alkalinity of PFS; the best effect with 95% decoloration was obtained wnder 13.43% alkalinity of PFS.
Keywords:polymerized ferri sulfate  alkalinity  flocculation performance
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号