| ANSYS在柔掩支架变形特性分析中的应用 |
| |
| 引用本文： | 郭守泉,张宏伟,蒲文龙.ANSYS在柔掩支架变形特性分析中的应用[J].黑龙江科技学院学报,2004,14(5):273-276. |
| |
| 作者姓名： | 郭守泉 张宏伟 蒲文龙 |
| |
| 作者单位： | 辽宁工程技术大学,资源与环境工程学院,辽宁,阜新,123000 |
| |
| 摘 要： | 选择柔性掩护支架工作时常见的凡种工况及支架的破坏形式，采用国外最为先进的三维设计和分析软件PRO／E建立柔性掩护支架的三维模型，利用有限元分析软件ANSYS对支架结构的强度和刚度进行分析，确定其应力和应变的薄弱点。根据有限元分析的具体结果，对柔性掩护支架的结构进行优化，重新建立模型，再次进行有限元分析。如此反复，直至获得柔性掩护支架的最佳结构。
|
| 关 键 词： | 掩护支架 ANSYS 力学特性 |
| 文章编号： | 1671-0118(2004)05-0273-04 |
Application of ANSYS in deformation characteristic of support |
| |
| GUO Shouquan,ZHANG Hongwei,PU Wenlong.Application of ANSYS in deformation characteristic of support[J].Journal of Heilongjiang Institute of Science and Technology,2004,14(5):273-276. |
| |
| Authors: | GUO Shouquan ZHANG Hongwei PU Wenlong |
| |
| Abstract: | Directed at several operation modes and destruction forms of support arising from the choice of flexible shield supports, the paper introduces both the adoption of the most advanced three-dimension design and analysis software PRO/E to form three-dimension models of the flexible shield support and the use of the finite element software ANSYS to analyze the intensity and rigidity of the structure of the support so as to determine its stress and weak spots once an emergency occurs. According to the concrete results of finite element analysis, the structure of the flexible shield support is optimized, another model of setting up is built and finite element analysis is carried out again. Repetition goes on until the best structure of the flexible shield support is achieved. |
| |
| Keywords: | flexible shield support ANSYS mechanical characteristics |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
