| 树脂结合剂CBN砂轮磨削力的试验研究 |
| |
| 引用本文： | 朱峰,黄奇葵,陈日曜,崔恒泰. 树脂结合剂CBN砂轮磨削力的试验研究[J]. 华中科技大学学报(自然科学版), 1994, 0(2) |
| |
| 作者姓名： | 朱峰 黄奇葵 陈日曜 崔恒泰 |
| |
| 作者单位： | 郑州磨料磨具磨削研究所，华中理工大学机械工程一系 |
| |
| 基金项目： | 国家教委博士点基金,机械工业技术发展基金 |
| |
| 摘 要： | 针对树脂结合剂ＣＢＮ砂轮表面状态的表征参数，试验研究了ＣＢＮ砂轮表面磨粒凸出高度和容屑比对磨削力的影响，以及ＣＢＮ砂轮磨削过程及磨削深度对磨削力的影响。分析了ＣＢＮ砂轮磨削过程中的磨削力特性．
|
| 关 键 词： | 磨削，立方氮化硼（CBN），树脂结合剂CBN砂轮，磨削力 |
An Investigation on the Grinding Force with the Resin-Bonded CBN Wheel |
| |
| Zhu FengDept.of Mech.Engin,. An Investigation on the Grinding Force with the Resin-Bonded CBN Wheel[J]. JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE, 1994, 0(2) |
| |
| Authors: | Zhu FengDept.of Mech.Engin |
| |
| Abstract: | The innuence of the protruding height of grain and chip space ratio on the grinding force is studied by experiment.The variation of the grinding force and the influence of the grind-ing depth on grinding force are also investigated.The grinding force characteristics with the CBN wheel are discussed.It is shown that the grinding force increase with a decrease of the protruding height of the grain and chip space ratio. The grinding force tends to be large at the beginning and decreases rapidly then to a steady value. The grinding force varies directly with the grinding depth It is believed that the chip strain forces form the main part of the grinding force with the CBN wheel. |
| |
| Keywords: | grinding cubic boron nitride(CBN) resin-bonded CBN wheel grinding force |
| 本文献已被 CNKI 等数据库收录！ |
