|
|||||
|
|
| 热连轧机油膜轴承弹性过盈装配过程研究 | |
| 引用本文： | 岳普煜,王建梅,马立峰,黄庆学. 热连轧机油膜轴承弹性过盈装配过程研究[J]. 太原科技大学学报, 2006, 27(4): 301-305 |
| 作者姓名： | 岳普煜 王建梅 马立峰 黄庆学 |
| 作者单位： | 1. 太原理工大学,太原,030024 2. 太原理工大学,太原,030024;太原科技大学,太原,030024 3. 太原科技大学,太原,030024 |
| 基金项目： | 国家自然科学基金;山西省自然科学基金 |
| 摘 要： | 针对宝钢1580热连轧机精轧机组支承辊油膜轴承锥套使用中存在的各类损伤问题，利用三维弹塑性接触问题边界元法定量分析了轧机油膜轴承锥套与轧辊辊颈过盈装配过程中的变形和载荷特性，得出了装拆过程中不同的胀型压力和轴向推力条件下锥套接触压力延母线方向的变化规律，同时锥套端部和密封槽附近接触压力峰值的存在是加速锥套损伤及降低其使用寿命的重要原因。最后，从锥套结构和装配工艺等方面提出了具体的改进措施。 |
| 关 键 词： | 油膜轴承 过盈装配 边界元法 锥套损伤 |
| 文章编号： | 1673-2057(2006)04-0301-05 |
| 修稿时间： | 2005-12-21 |
Research on Assembly Process of Oil-film Bearing of Hot Strip Mill by Elastic Conjunction |
|
| YUE Pu-yu,WANG Jian-mei,MA Li-feng,HUANG Qing-xue. Research on Assembly Process of Oil-film Bearing of Hot Strip Mill by Elastic Conjunction[J]. Journal of Taiyuan University of Science and Technology, 2006, 27(4): 301-305 | |
| Authors: | YUE Pu-yu WANG Jian-mei MA Li-feng HUANG Qing-xue |
| Abstract: | Aimed at all kinds of damage phenomena in the sleeve usage of oil-film bearing in the backup roll of Baoshan 1580 hot strip mill,during the process of elastic conjunction between sleeve and rollneck,deformation and load properties are quantitatively analyzed by boundary element method for 3D elastic and plastic contact problems.The variations of contact pressure of sleeve along generating line are obtained under different hydroform pressures and axial pushing forces.Meanwhile,the contact pressure peaks in sleeve ends and the zones close to seal grooves are major considerations that fasten sleeve damage and decrease its service life.Finally,detailed measures on improving sleeve structure and assembly processes are accordingly brought forward. |
| Keywords: | oil-film bearing elastic conjunction boundary element method sleeve damage |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |