| Fe3Si基合金板材的制备技术 |
| |
| 引用本文： | 林均品,钟太彬,林志,陈国良.Fe3Si基合金板材的制备技术[J].北京科技大学学报,2001,23(5):442-444. |
| |
| 作者姓名： | 林均品 钟太彬 林志 陈国良 |
| |
| 作者单位： | 北京科技大学 |
| |
| 基金项目： | 国家重点基础研究发展计划(973计划);G200006720-2; |
| |
| 摘 要： | 在既有的研究工作基础上，给出了更为合适的锻造、轧制等工艺参数和工艺方法。利用普通的锻造和轧制设备，成功制备了良好的约1．5mm厚的Fe3Si基合金薄板。制备过程中典型的微观组织变化如下：铸态组织 的晶粒较大且很不均匀；锻造组织为通过再结晶而形成的晶粒较细且均匀的等轴状组织；轧态组织为纤维组织。
|
| 关 键 词： | Fe3Si基合金 温轧 再结晶 硅化铁基合金 板材 |
| 修稿时间： | 2001年2月22日 |
Fabrication of the Sheets for Fe3Si Based Alloy |
| |
| LIN Junpin,ZHONG Taibin,LIN Zhi,CHEN Guoliang The State Key Laboratory for Advanced Metal Materials,UST Beijing.Fabrication of the Sheets for Fe3Si Based Alloy[J].Journal of University of Science and Technology Beijing,2001,23(5):442-444. |
| |
| Authors: | LIN Junpin ZHONG Taibin LIN Zhi CHEN Guoliang The State Key Laboratory for Advanced Metal Materials UST Beijing |
| |
| Institution: | LIN Junpin,ZHONG Taibin,LIN Zhi,CHEN Guoliang The State Key Laboratory for Advanced Metal Materials,UST Beijing. Beijing 100083,China |
| |
| Abstract: | Based on the Peng's and Chen's works, finding the appropriate technical parameters for forging and rolling, Fe3Si based alloy sheets of about 1.5 mm in thickness were obtained successfully by the traditional forging and double warm rolling. The grains of the cast structure are larger and not uniform. The uniform tine equiaxed grains form by recrystallization of forging structure. The microstructure becomes elongated after rol-ling. |
| |
| Keywords: | Fe3Si based alloy warm rolling recrystallization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
