| 聚乙二醇模板对多孔氧化物复合材料的影响 |
| |
| 引用本文： | 王冬梅,李村,吴振玉,朱维菊. 聚乙二醇模板对多孔氧化物复合材料的影响[J]. 安徽大学学报(自然科学版), 2011, 0(3) |
| |
| 作者姓名： | 王冬梅 李村 吴振玉 朱维菊 |
| |
| 作者单位： | 安徽大学化学化工学院; |
| |
| 基金项目： | 安徽省高校自然科学研究基金重点资助项目(KJ2009A103) |
| |
| 摘 要： | 以聚乙二醇(PEG)为模板剂、正硅酸乙酯(TEOS)为硅源,采用溶胶-凝胶法合成了铜掺杂介孔硅铝氧化物复合材料,并通过N2等温吸附-脱附法、X射线衍射、红外光谱等测试对产物进行表征,考察了PEG质量、分子量以及CuO掺杂量对复合材料孔结构的影响.结果表明:加入PEG能够明显增加复合材料的比表面积,随PEG质量增大,介孔孔容增多,孔径分布较均匀,加入24 g PEG时比表面积增加一倍达到约500 m2.g-1.PEG的分子量为600～2 000时样品以4 nm介孔为主,而分子量为10 000时,样品以小于2 nm的微孔为主.
|
| 关 键 词： | 复合材料 溶胶-凝胶法 掺杂 介孔 |
Influence of polyethyethylene glycol templates on porous oxide composite |
| |
| WANG Dong-mei,LI Cun,WU Zhen-yu,ZHU Wei-ju. Influence of polyethyethylene glycol templates on porous oxide composite[J]. Journal of Anhui University(Natural Sciences), 2011, 0(3) |
| |
| Authors: | WANG Dong-mei LI Cun WU Zhen-yu ZHU Wei-ju |
| |
| Affiliation: | WANG Dong-mei,LI Cun,WU Zhen-yu,ZHU Wei-ju (College of Chemistry and Chemical Engineering,Anhui University,Hefei 230039,China) |
| |
| Abstract: | Cu-doped mesoporous silica-aluminia composite was prepared by sol-gel method,using TEOS as silica source and PEG as template.The effect of PEG mass,molecular weight,and CuO wt% on the textural structure composite was characterized by N2 adsorption-desorption isotherm,X-ray diffraction(XRD),and Fourier transform infrared(FT-IR).The results showed that the specific surface area of samples increased obviously using PEG as template.The specific surface area of samples increased double to 500 m2 g-1 using 24 g P... |
| |
| Keywords: | composites sol-gel inclusions mesoporous |
| 本文献已被 CNKI 等数据库收录！ |
|
