首页 | 本学科首页   官方微博 | 高级检索  
     检索      

新型储氢复合材料Mg/MWNTs的氢化性能
引用本文:陈东,陈廉,刘实,马常祥,陈德敏,王隆保,杨柯.新型储氢复合材料Mg/MWNTs的氢化性能[J].中山大学学报(自然科学版),2003,42(Z1):32-34.
作者姓名:陈东  陈廉  刘实  马常祥  陈德敏  王隆保  杨柯
作者单位:1. 中国科学院金属研究所,辽宁,沈阳,110016;东北大学理学院,辽宁,沈阳,110006
2. 中国科学院金属研究所,辽宁,沈阳,110016
3. 东北大学理学院,辽宁,沈阳,110006
基金项目:the National Major Fundamental Research Project,国家自然科学基金 
摘    要:采用催化反应球磨方法,研制成复合材料Mg-MWNTs(w=5%,20%).利用储放氢实验装置,测试了Mg/MWNTs吸放氢动力学性能.研究发现,复合材料Mg-MWNTs(w=5%,20%)在298 K和2.0 MPa氢压时最大储氢量都很低;在373 K、473 K和553 K温度时,Mg-5%(w)MWNTs的最大储氢量分别为5.34%、5.89% 和6.08%;而Mg-20%(w) MWNTs只有2.11%、2.68% 和2.75%.与其它储氢复合材料相比,复合材料Mg-5%(w)MWNTs在保持较好的最大储氢量基础上,具有很好的吸放氢动力学性能.

关 键 词:复合材料Mg/MWNTs  催化反应球磨  吸放氢动力学性能

Hydriding/dehydriging Properties of Advanced Hydrogen Storage Mg/MWNTs Composites
Abstract.Hydriding/dehydriging Properties of Advanced Hydrogen Storage Mg/MWNTs Composites[J].Acta Scientiarum Naturalium Universitatis Sunyatseni,2003,42(Z1):32-34.
Authors:Abstract
Abstract:The composite Mg-wMWNTs(w=5%,20%) was made by catalytic reacting ball-milling under the hydrogen atmosphere. The absorption/desorption kinetics for the composite Mg/MWNTs were examined by taking the apparatus for hydrogen adsorption/desorption. It was found that under 2.0 MPa hydrogen pressure, the maximum hydrogen storage capacities of the two composites(w=5%,20%) were very low and similar at 298, 373, 473 and 553 K, the maximum hydrogen storage capacities of the Mg-5%(w) MWNTs were respectively 5.34%, 5.89% and 6.08%; however, only 2.11%, 2.68% and 2.75% for the Mg-20%(w) MWNTs. Compared with the other hydrogen storage composite materials, the Mg-5%(w) MWNTs not only keeps the maximum hydrogen storage capacities better but also has good hydrogen absorption/desorption rates.
Keywords:Mg/MWNTs composite  catalytic reacting ball milling  hydriding/dehydriging property
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号