| 扭转载荷下环形切口轴的应力集中系数 |
| |
| 引用本文： | 马平.扭转载荷下环形切口轴的应力集中系数[J].兰州理工大学学报,2012,38(2):30-33. |
| |
| 作者姓名： | 马平 |
| |
| 作者单位： | 兰州理工大学 电气工程与信息工程学院,甘肃兰州,730050 |
| |
| 摘 要： | 按照切口尖端半径、切口深度和切口张角,对切口进行分类.根据特殊情况下的精确解和一般情况下的数值结果,利用最小二乘法,拟合扭转载荷下具有环形切口轴的应力集中系数的计算公式.利用该公式计算扭转载荷下环形切口轴的应力集中系数.计算结果表明:该公式可以计算具有各种环形切口轴的应力集中系数,计算精度高,误差不超过1%.
|
| 关 键 词： | 环形切口 轴 应力集中系数 扭转载荷 计算公式 |
Stress concentration factor of shaft with annular notch under torsional load |
| |
| MA Ping.Stress concentration factor of shaft with annular notch under torsional load[J].Journal of Lanzhou University of Technology,2012,38(2):30-33. |
| |
| Authors: | MA Ping |
| |
| Institution: | MA Ping(College of Electrical and Information Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China) |
| |
| Abstract: | The notches were classified according to their tip radius,depth and opening angle.The stress concentration factor of annular notched shaft under torsional load was fitted and its evaluation formula was obtained by means of least-square method based on the results of accurate solution in specific case and numerical solution in common case.The stress concentration factor of any notched shaft under torsion could be calculated by using this formula with high precision and the error was so small as only 1%,which was showed by the evaluation result. |
| |
| Keywords: | annular notch shaft stress concentration factor torsional load evaluation formula |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
