首页 | 本学科首页   官方微博 | 高级检索  
     检索      

矩阵式变换器的输入功率因数控制
引用本文:梅杨,孙凯,黄立培.矩阵式变换器的输入功率因数控制[J].清华大学学报(自然科学版),2009(4).
作者姓名:梅杨  孙凯  黄立培
作者单位:清华大学电机工程与应用电子技术系电力系统及大型发电设备安全控制和仿真国家重点实验室;北方工业大学现场总线及自动化北京市重点实验室;
基金项目:国家自然科学基金资助项目(50607012);;北京市自然科学基金重点项目(KZ200710772015)
摘    要:矩阵式变换器输入滤波器会引起滤波前后电流基频分量的相位差,降低矩阵式变换器的输入功率因数。为了保证其输入功率因数始终接近1,以减小对电网的不利影响,提出了一种自适应控制方法。根据输入电压和电流值计算输入滤波器前后的电流相位差,并据此实时调节输入相移角的设定值,实现在任意工况下对输入功率因数的有效控制。在一台基于逆阻式IGBT(RB-IGBT)的矩阵式变换器驱动异步电机调速系统样机上进行了实验测试。在不同负载情况下,采用该方法均有效减小了输入功率因数角,使输入功率因数始终接近于1,从而改善了矩阵式变换器的输入性能。

关 键 词:矩阵式变换器  相位角  输入功率因数  控制  

Input power factor control for matrix converters
MEI Yang,SUN Kai,HUANG Lipei.Input power factor control for matrix converters[J].Journal of Tsinghua University(Science and Technology),2009(4).
Authors:MEI Yang    SUN Kai  HUANG Lipei
Institution:1.State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment;Department of Electrical Engineering;Tsinghua University;Beijing 100084;China;2.Field Bus Technique and Automation Key Laboratory;North China University of Technology;Beijing 100041;China
Abstract:A matrix converter(MC) input filter introduces a phase difference between the input current before and after the filter,which directly influences the MC input power factor.An adaptive input power factor control method was developed to maintain a unity input power factor and reduce the negative influences on the power grid.Measurements of the input voltage and current can be used to adjust the displacement angle in real time to modify the input power factor at the grid side for any load condition.Tests on a ...
Keywords:
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号