| Si含量对TiAlSiN纳米复合涂层的微观结构和力学性能的影响 |
| |
| 引用本文： | 李伟,赵永生,刘平,马凤仓,刘新宽,陈小红,何代华,王贝贝,康祎炜.Si含量对TiAlSiN纳米复合涂层的微观结构和力学性能的影响[J].上海理工大学学报,2014,35(2):52-56. |
| |
| 作者姓名： | 李伟 赵永生 刘平 马凤仓 刘新宽 陈小红 何代华 王贝贝 康祎炜 |
| |
| 作者单位： | 上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093;上海理工大学 材料科学与工程学院, 上海 200093 |
| |
| 基金项目： | 上海市自然科学基金项目（11ZR1424600）；上海市教委重点学科项目（J50503） |
| |
| 摘 要： | 采用不同Si含量的TiAlSi复合靶，在Si基底片上用射频磁控溅射工艺沉积了TiAlSiN纳米复合涂层，采用X射线衍射仪（XRD）、高分辨透射电子显微镜（HRTEM）和纳米压痕技术研究了Si含量对TiAlSiN涂层的微观结构和力学性能的影响.结果表明：TiAlSiN涂层内部形成了Si3N4界面相包裹TiAlN纳米等轴晶粒的纳米复合结构.随着Si含量的增加，TiAlSiN涂层的结晶程度先增加后降低，涂层内部的晶粒尺寸先减小后趋于平稳，涂层的力学性能先升高后降低.当Si与TiAl原子比为3：22时获得的最高硬度和弹性模量分别为37.1 GPa和357.3 GPa.
|
| 关 键 词： | TiAlSiN纳米复合涂层 Si含量 微观结构 力学性能 |
| 收稿时间： | 2013/12/11 0:00:00 |
Influence of Si Content on Microstructure and Mechanical Properties of TiAlSiN Nanocomposite Coatings |
| |
| LI Wei,ZHAO Yong-sheng,LIU Ping,MA Feng-cang,LIU Xin-kuan,CHEN Xiao-hong,HE Dai-hu,WANG Bei-bei and KANG Yi-wei.Influence of Si Content on Microstructure and Mechanical Properties of TiAlSiN Nanocomposite Coatings[J].Journal of University of Shanghai For Science and Technology,2014,35(2):52-56. |
| |
| Authors: | LI Wei ZHAO Yong-sheng LIU Ping MA Feng-cang LIU Xin-kuan CHEN Xiao-hong HE Dai-hu WANG Bei-bei and KANG Yi-wei |
| |
| Institution: | School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China |
| |
| Abstract: | Using TiAlSi targets with different Si contents,TiAlSiN nanocomposite coatings were deposited in Si substrate by R.F. magnetron sputtering.By means of X-ray diffraction(XRD),high resolution transmission electron microscopy(HRTEM) and nano-indentation techniques,the influences of Si content on microstructure and mechanical properties of TiAlSiN nanocomposite coatingswere investigated.The results show that the nanocomposite structure with TiAlN nanocrystallites surrounded by Si3N4 interfacial phase formed within the TiAlSiN coating.With the increase of Si content,the crystallization degree of TiAlSiN coating first increased and then decreased,grain size of the coatings firstdecreased and then kept stable,the mechanical properties of the coatings first improvedand then reduced.When the ratio of Si(atom%) and TiAl(atom%) constituents was 3:22,the maximum hardness and elastic modulus could respectively reach 37.1 GPa and 357.3 GPa. |
| |
| Keywords: | TiAlSiN nanocompositecoating Si content microstructure mechanical property |
|
| 点击此处可从《上海理工大学学报》浏览原始摘要信息 |
| 点击此处可从《上海理工大学学报》下载免费的PDF全文 |
|
