| 汽车热交换器用铝合金钎焊带包覆率范围的确定 |
| |
| 引用本文： | 刘正春,甘卫平,彭志辉,韦家弘.汽车热交换器用铝合金钎焊带包覆率范围的确定[J].中南大学学报(自然科学版),1999(4). |
| |
| 作者姓名： | 刘正春 甘卫平 彭志辉 韦家弘 |
| |
| 作者单位： | 中南工业大学材料科学与工程系 |
| |
| 基金项目： | 国家“九五”科技攻关计划基金 |
| |
| 摘 要： | 设计并制备了几种不同包覆率的３层复合铝合金钎焊带材，检测了每种带材在正常钎焊条件下的抗下垂性能，从铝合金钎焊带抗下垂的能力和填充缝隙的能力２个方面对包覆率的选择进行了分析与讨论，以厚度为０．１６ｍｍ的Ａ４３４３／Ａ３００３／Ａ４３４３铝合金钎焊带为例，得出其最佳包覆率范围是１０％～１６％．该方法可推广到其它厚度和材质的铝合金钎焊带中，确定它们的最佳包覆率范围．
|
| 关 键 词： | 包覆率 抗下垂性 钎焊 铝合金 |
DETERMINATION OF THE CLAD RATIO OF THE ALUMINUM ALLOY BRAZING SHEET FOR AUTOMOBILE HEAT EXCHANGERS |
| |
| Liu Zhengchun,Gan Weiping,Peng Zhihui,Wei Jiahong.DETERMINATION OF THE CLAD RATIO OF THE ALUMINUM ALLOY BRAZING SHEET FOR AUTOMOBILE HEAT EXCHANGERS[J].Journal of Central South University:Science and Technology,1999(4). |
| |
| Authors: | Liu Zhengchun Gan Weiping Peng Zhihui Wei Jiahong |
| |
| Abstract: | Seven samples of sandwich aluminum alloy brazing sheet with different clad ratios are designed and prepared. The sag resistance of each sample is inspected under the brazing condition. According to the requirements about both sag resistance and clearance filling ability, how to choose the suitable clad ratio is discussed. It is concluded that the optimum clad ratio of 0.16 mm A4343/A3003/A4343 brazing sheet is 10% to 16%. It is expected that the method here can be applied to brazing sheets of different thickness and composition. |
| |
| Keywords: | clad ratio sag resistance braze aluminum alloy |
| 本文献已被 CNKI 等数据库收录！ |
