| 回采巷道外错布置的理论与实践 |
| |
| 引用本文： | 翟英达,李宝富.回采巷道外错布置的理论与实践[J].太原理工大学学报,2006,37(4):420-422,433. |
| |
| 作者姓名： | 翟英达 李宝富 |
| |
| 作者单位： | 1. 太原理工大学,矿业工程学院,山西,太原,030024;大同煤矿集团博士后科研工作站,山西,大同,037003
2. 焦作工学院,河南,焦作,454000 |
| |
| 基金项目： | 外错式巷道组岩稳定性评判与控制技术研究项目 |
| |
| 摘 要： | 通过综合分析煤柱应力分布和破坏情况，探讨了回采巷道外错布置时巷道位置的选择原理；运用岩体极限平衡理论和逐步破坏理论，建立了上分层煤柱塑性区宽度计算方法，在此基础上提出了上分层煤柱最优宽度应大于2倍破裂区宽度且小于2倍塑性区宽度的结论；在上分层煤柱尺寸优化设计之后，下分层巷道外错距离可由上分层煤柱尺寸及其破裂区宽度加以确定。上述理论在潞安矿业集团五阳矿，应用效果良好。
|
| 关 键 词： | 分层开采 回采巷道 煤柱 外错布置 |
| 文章编号： | 1007-9432（2006）04-0420-03 |
| 收稿时间： | 2005-09-02 |
| 修稿时间： | 2005-09-02 |
The Theory and Practice of Outward Staggered Entries Arranging in Stoping |
| |
| ZHAI Ying-da,LI Bao-fu.The Theory and Practice of Outward Staggered Entries Arranging in Stoping[J].Journal of Taiyuan University of Technology,2006,37(4):420-422,433. |
| |
| Authors: | ZHAI Ying-da LI Bao-fu |
| |
| Institution: | 1. Collage of Mining Engineering of TUT, Taiyuan 030024,China; 2. Postdoctoral Research Center of Datong Coal Mine Group Company, Datong 037003,China; 3. Jiaozuo Institute of Technology, Jiaozuo 454000,China |
| |
| Abstract: | Based on the theory of rock mass limit balance and progressive damage theory, the way of extent calculating for plastic zone of higher slice pillar is given, and the conclusion that optimum width of higher slice pillar is greater than 2 times of size of pillar broken zone and smaller than 2 times of size of pillar plastic area is obtained. After the size of higher slice pillar is designed optimally, the outward staggering measurements of lower slice roadway can be determined by the size of higher slice pillar and its damage extent. And, an applying example of above researches is given. |
| |
| Keywords: | slicing actual mining roadway coal pillar outward staggered arrangement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
