首页 | 本学科首页   官方微博 | 高级检索  
     检索      

热处理对高硫钢硫化物形态及性能的影响
引用本文:卢献忠,吴润,李书黎,吴海涛,翟万里,黄雷,吴德炳,宋述鹏.热处理对高硫钢硫化物形态及性能的影响[J].武汉科技大学学报(自然科学版),2010,33(2).
作者姓名:卢献忠  吴润  李书黎  吴海涛  翟万里  黄雷  吴德炳  宋述鹏
作者单位:1. 武汉科技大学材料与冶金学院,湖北,武汉,430081;武汉钢铁重工集团有限公司,湖北,武汉,430083
2. 武汉科技大学材料与冶金学院,湖北,武汉,430081
3. 安阳市青山高硫合金钢有限责任公司,河南,安阳,455000
基金项目:湖北省自然科学基金资助项目,武汉科技大学绿色制造与节能减排科技研究中心开放基金项目 
摘    要:研究淬回火热处理工艺对高硫钢的基体组织和硫化物形态的影响,分析了其力学性能和磨损性能.结果表明,热处理后高硫钢中硫化物主要为FeS,其形态趋于球化;淬火温度由880 ℃升至900 ℃,高硫钢的抗拉强度由460 MPa提高到590 MPa,伸长率由1.7%变化到3.0%,但其仍为脆性材料,这与组织中含有大量硫化物有关;由于硫化物的自润滑作用,热处理后高硫钢的耐磨性随连续磨损时间的延长而改善,并明显优于淬火后低温回火的GCr15钢.

关 键 词:高硫钢  硫化物  热处理  力学性能  耐磨性

Effect of heat treatment on the morphology of the sulfide in the high sulfide steel and the steel properties
Lu Xianzhong,Wu Run,Li Shuli,Wu Haitao,Zhai Wanli,Huang Lei,Wu Debing,Song Shupeng.Effect of heat treatment on the morphology of the sulfide in the high sulfide steel and the steel properties[J].Journal of Wuhan University of Science and Technology(Natural Science Edition),2010,33(2).
Authors:Lu Xianzhong    Wu Run  Li Shuli  Wu Haitao  Zhai Wanli  Huang Lei  Wu Debing  Song Shupeng
Institution:Lu Xianzhong1,2,Wu Run1,Li Shuli1,Wu Haitao3,Zhai Wanli1,Huang Lei1,Wu Debing3,Song Shupeng1(1.College of Materials Science , Metallurgical Engineering,Wuhan University of Science , Technology,Wuhan 430081,China,2.Wuhan Iron , Steel Machine Inc.,Wuhan 430083,3.Qingshan HS Alloy Steel Company,Anyang 455000,China)
Abstract:
Keywords:high sulfide steel  sulfide  heat treatment  mechanical property  antifriction  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号