| LW-13/22型压缩机三级活塞的三维有限元分析 |
| |
| 引用本文： | 谭晶莹. LW-13/22型压缩机三级活塞的三维有限元分析[J]. 湖南理工学院学报：自然科学版, 2006, 19(4): 82-84 |
| |
| 作者姓名： | 谭晶莹 |
| |
| 作者单位： | 湖南理工学院机械与电气工程系 湖南岳阳414000 |
| |
| 摘 要： | 通过对实际工况下LW-13／22型压缩机三级活塞的受力分析,建立了有限元分析模型,对整个载荷循环过程进行应力和变形分析,并由此得到了LW-13/22型压缩机三级活塞在实际工况时的应力分布特点及变形规律,求得了活塞最大应力位置和最大应力时的主轴转角。
|
| 关 键 词： | LW-13／22型压缩机 有限元 活塞 强度分析 变形分析 |
| 文章编号： | 1672-5298（2006）04-082-03 |
| 收稿时间： | 2006-07-12 |
| 修稿时间： | 2006-07-12 |
Three-dimensional finite element analyses of the third piston in the LW-13/22 compressor |
| |
| TAN Jing-ying. Three-dimensional finite element analyses of the third piston in the LW-13/22 compressor[J]. Journal of Hunan Institute of Science and Technology, 2006, 19(4): 82-84 |
| |
| Authors: | TAN Jing-ying |
| |
| Abstract: | Through the stress analysis of the Third Piston in the LW-13/22 compressor under a practical working condition, a finite element analysis model was founded to analyze the stress and deformation of the whole load cycle. The stress distribution characteristics and the deformation laws were derived when the Third Piston in the LW-13/22 Compressor was in a practical working condition. The maximum stress position and the rotating angle of the major axle at the maximum stress were determined. |
| |
| Keywords: | LW-13/22 compressor finite element piston strength analysis deformation analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
