首页 | 本学科首页   官方微博 | 高级检索  
     检索      

空位理论模型对单组分吸附等温线的模拟
引用本文:张永春,王金渠,李春华,陈方震.空位理论模型对单组分吸附等温线的模拟[J].大连理工大学学报,1993(4).
作者姓名:张永春  王金渠  李春华  陈方震
作者单位:大连理工大学化工学院 (张永春,王金渠,李春华),大连理工大学化工学院(陈方震)
摘    要:在298.2 K温度和13.3~101.3kPa压力范围内,测定了乙烯、乙烷和 二氧化碳单组分气体在AE型吸附剂上的吸附平衡数据.用空位溶液理论 模型对数据进行分析,并用顶点收敛法进行回归计算,得到了空位溶液理论 模型的四个物性参数:极限吸附量,享利常数b,两个威尔逊参数A13和 ;用空位溶液理论对单组分等温线进行了很好地描述,使模型与全部压力 范围内的纯组分等温线得到很好地拟合.

关 键 词:吸附平衡  等温线  空位理论  模型构造  单组分体系

Similation of vacancy theory model for isotherm of single component
Zhang Yongchun,Wang Jinqu,Li Chunhua,Chen Fangzhen.Similation of vacancy theory model for isotherm of single component[J].Journal of Dalian University of Technology,1993(4).
Authors:Zhang Yongchun  Wang Jinqu  Li Chunhua  Chen Fangzhen
Institution:School of Chemical Engineering. DUT
Abstract:Simple component equilibrium data for ethylene ,ethane and carbon dioxide on AE have been determined at 298. 2 K and pressures from 13. 3 to 101. 3 kPa. The adsorption data have been analyzed in terms of the vacancy solution model isotherm. The model provides an excellent correlation of pure component isotherms over the entire pressure range. It is shown that equilibrium data for the adsorption of single gases were correctly predicted by the four model parameters (limiting molecular Volume ,Henry's constants Li1 and two Wilson's parameters (A13 ,A31) derived from analysis of the pure component isotherm. The experimental results were given the reasonable explaination in terms of the adsorbent physichemical properties.
Keywords:adsorption equlibrium  isotherm  vacancy theory  model construction  single-component system
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号