首页 | 本学科首页   官方微博 | 高级检索  
     检索      

含Bi易切削变形Zn-Al合金显微组织与性能
引用本文:林高用,孙和平,曾菊花,王莉.含Bi易切削变形Zn-Al合金显微组织与性能[J].中南大学学报(自然科学版),2011,42(11).
作者姓名:林高用  孙和平  曾菊花  王莉
作者单位:1. 中南大学材料科学与工程学院,湖南长沙,410083;中南大学有色金属材料科学与工程教育部重点实验室,湖南长沙,410083
2. 中南大学材料科学与工程学院,湖南长沙,410083
基金项目:国家"十一五"科技支撑计划项目
摘    要:采用力学性能测试、光学显微镜、扫描电镜和能谱分析技术、切削性能测试、电镀试验对自行配制的含Bi易切削变形Zn-Al合金铸态、挤压态的组织与性能进行研究.研究结果表明:低熔点的Bi相在Zn-Al合金中以针状弥散分布,改善Zn-Al合金的切削性能;Bi含量超过0.5%(质量分数)时,Bi对Zn-Al易切削变形合金电镀性能产生不良影响;自行配制的Zn-10%Al-0.3%Bi-X合金,切削性能良好,抗拉强度达到351 MPa,伸长率为18%,电镀不易起泡,表现出较好的综合性能,可作为部分铜合金替代材料,用于轴承、连接件、五金、家电等结构件.

关 键 词:变形锌合金  Bi  显微组织  切削性能

Microstructure and properties of free-cutting deformation Zn-Al alloy containing Bi
LIN Gao-yong,SUN Li-ping,ZENG Ju-hua,WANG Li.Microstructure and properties of free-cutting deformation Zn-Al alloy containing Bi[J].Journal of Central South University:Science and Technology,2011,42(11).
Authors:LIN Gao-yong  SUN Li-ping  ZENG Ju-hua  WANG Li
Institution:LIN Gao-yong1,2,SUN Li-ping1,ZENG Ju-hua1,WANG Li1 (1.School of Materials Science and Engineering,Central South University,Changsha 410083,China,2.The Key Laboratory of Nonferrous Metal Materials Science and Engineering,Ministry of Education,China)
Abstract:The microstructure and properties of self-developed free-cutting deformation Zn-Al alloys containing Bi in the cast and extruded conditions were investigated by mechanical tests,optical microscopy,scanning electron microscopy,energy spectrum analysis,machinability tests and plating performance tests.The results show that the machinability of the Zn-Al alloy can be improved by needle dispersion distributed low-melting Bi phase.The plating performance of free-cutting deformation Zn-Al alloys gets worse when t...
Keywords:deformation zinc alloy  Bi  microstructure  machinability  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号