首页 | 本学科首页   官方微博 | 高级检索  
     检索      

溶胶凝胶自燃烧法合成LaFeO_3纳米晶
引用本文:齐西伟,周济,张迎春,岳振星,李龙土,桂治轮.溶胶凝胶自燃烧法合成LaFeO_3纳米晶[J].黑龙江科技学院学报,2001(4).
作者姓名:齐西伟  周济  张迎春  岳振星  李龙土  桂治轮
作者单位:清华大学新型陶瓷与精细工艺国家重点实验室,清华大学新型陶瓷与精细工艺国家重点实验室,清华大学新型陶瓷与精细工艺国家重点实验室,清华大学新型陶瓷与精细工艺国家重点实验室,清华大学新型陶瓷与精细工艺国家重点实验室,清华大学新型陶瓷与精细工艺国家重点实验室 北京 10
基金项目:国家自然科学基金重大项目资助(编号:59995523)
摘    要:将溶胶凝胶法和低温燃烧法相结合,开发了一种溶胶凝胶自燃烧法合成纳米晶技术,并 用此技术合成了LaFeO3。纳米晶。利用XRD、TEM和BET对合成的纳米晶进行了结构、形貌、大小和 比表面积的测量和表征。并借助于TG—DTA研究了干凝胶的自蔓延特性和析晶过程。结果表明,由 硝酸盐和柠檬酸盐形成的干凝胶,具有自蔓延燃烧的特性,自燃烧的本质是在硝酸氨的参与下,硝酸 根作氧化剂,柠檬酸中的含碳基团为还原剂(燃料),它们之间发生氧化还原反应。干凝胶自燃烧后, 直接在室温下形成 40~60 nm具有钙钛矿结构的纯相晶态的 LaFeO3纳米晶。

关 键 词:溶胶凝胶自燃烧法  纳米晶  LaFeO_3

Synthesis of Nanocrystalline LaFe0_3 by Sol-gel Auto-combustion Method
QI Xiwei ZHOU Ji ZHANG Yingchun,YUE Zhenxing LI Longtu GUI Zhilun.Synthesis of Nanocrystalline LaFe0_3 by Sol-gel Auto-combustion Method[J].Journal of Heilongjiang Institute of Science and Technology,2001(4).
Authors:QI Xiwei ZHOU Ji ZHANG Yingchun    YUE Zhenxing LI Longtu GUI Zhilun
Institution:QI Xiwei1 ZHOU Ji1 ZHANG Yingchun1,2,YUE Zhenxing1 LI Longtu1 GUI Zhilun1
Abstract:Nanocrystalline LaFeO3 was prepared by a novel sol-gel auto-combustion method. The structure, morphology, size and specific surface were characterized and measured by XRD, TEM and BET techniques, and the property of dried gels' auto-combustion and crystallization were studied by TG-DTA. The results indicate the gels, made from the aqueous solutions of citric acid and nitrate, take on the characterization of auto-combustion when being ignited at any point of dried gels. Nanocrystalline LaFeO3 is directly formed after combustion with particle size of 40-60nm. The as-synthesized powders were single and crys-tal LaFeO3 phase.
Keywords:sol-gel auto-combustion method  nanocrystalline  LaFeO3
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号