气固两相流能耗特性的试验研究

为了研究柱塞式气力输送气固两相流的能耗特性,对实际的工业气力输送系统进行1:1实验台改造,首先,确定影响能耗的几个关键因素为主进气阀流量、补气阀流量、助吹阀的流量及气源压力;然后,根据工程经验设计孔板大小范围,利用正交实验确立定量、定长和定物料的气力输送能耗的实验方法,分析了各因素对能耗影响的主次及各个因素下的最优解;最后,对实验结果进行了实际生产验证,得出了1 m3仓泵输送平均粒径为23 μm,松散堆积密度为800 kg/m3的粉煤灰,输送距离为315 m气力能耗的最小值为1263.58 kN·m,最佳气源压力为0.35 Mpa,进气流量孔板为DN15,补气流量孔板为DN5.助吹流量孔板为DN10.研究结果对柱塞式气力输送系统的工程设计、运行和理论研究提供重要依据.

Experimental research on energy consumption properties of gas-solid two phases flows

In order to research the consumption of gas-solid two phase flow,a 1:1 improvement of test bench for the pneumatic conveying system in actual industry was required.First of all,the major factors affecting consumption,including the flow of main conveying gas valve,fluidizing gas valve,adjustment gas valve and the pressure of gas supply were identified;then the size of pore plate was designed and set according to the experience gained from engineering,and main effect and side effect to consumption caused by t...