| 飞轮芯子平档自动装配铆合机床设计方案的研究 |
| |
| 引用本文： | 刘有毅,张今渡.飞轮芯子平档自动装配铆合机床设计方案的研究[J].上海应用技术学院学报,2004,4(3):181-185. |
| |
| 作者姓名： | 刘有毅 张今渡 |
| |
| 作者单位： | 上海应用技术学院 机械与自动化工程学院，上海应用技术学院 机械与自动化工程学院 上海，200235，上海，200235 |
| |
| 摘 要： | 采用特制的料仓，将中间有孔的平档适当斜置，由机械手夹持的芯子在直线推进的过程中，其锥形凸台自由进入平档内孔后将该平档从料仓中拉出并完成两者的自动装配和铆合作业。实现了用一个机械手同时完成原来需要双手配合才能完成的两项作业。在提高安全性、降低劳动强度和提高生产效率的同时，简化了专机结构，降低了研制成本。
|
| 关 键 词： | 自动装配 劳动保护 主动防护 生产效率 |
| 文章编号： | 1671-7333(2004)03-0181-05 |
| 修稿时间： | 2004年6月14日 |
Study on the Project of Riveting Machine for Auto Fitting Washer-shaped baffle on Flywheel Wick |
| |
| LIU You-yi,ZHANG Jin-du.Study on the Project of Riveting Machine for Auto Fitting Washer-shaped baffle on Flywheel Wick[J].Journal of Shanghai Institute of Technology: Natural Science,2004,4(3):181-185. |
| |
| Authors: | LIU You-yi ZHANG Jin-du |
| |
| Abstract: | As the washer-shaped baffle with a hole has been obliquely placed into a special stock bin,when a flywheel wick held by manipulator is pushed forward, the convex cone of the flywheel wick freely enters into the hole of the baffle and draws the baffle out from the stock bin. Then, that washer-shaped baffle is fitted on flywheel wick carried by riveting machine. Therefore, with a manipulator both operations of placing the baffle and flywheel wick are finished. As a result, the safety and productive efficiency are raised, the structure of single-purpos machine is simplified,and the labor intensity and the cost are reduced. |
| |
| Keywords: | auto fitting labor protective active safeguard productive efficiency |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
