| 带钢拉伸弯曲矫直变形过程仿真研究 |
| |
| 引用本文： | 李忠富,王文广,白剑,徐晓明.带钢拉伸弯曲矫直变形过程仿真研究[J].北京科技大学学报,2007(Z2). |
| |
| 作者姓名： | 李忠富 王文广 白剑 徐晓明 |
| |
| 作者单位： | 北京科技大学机械工程学院 北京100083(李忠富，王文广，白剑)，中国机械设备进出口总公司 北京100055(徐晓明) |
| |
| 摘 要： | 带钢拉伸弯曲变形过程的表征是拉伸弯曲矫直工艺研究中的关键,带钢拉伸弯曲变形过程在本质上就是带钢在张力作用下的反复弯曲变形过程.本文建立了可以模拟此变形过程的有限元仿真模型,并对带钢拉伸弯曲变形过程进行了仿真研究,揭示了带钢产生塑性延伸和板形矫正的机理.在此基础上,提出了拉伸弯曲矫直工艺使用制度.
|
| 关 键 词： | 带钢 拉伸弯曲矫直 仿真 拉伸弯曲矫直工艺 |
Simulation of strip deformation in process of tension leveling |
| |
| LI Zhongfu,WANG Wenguang,BAI Jian,XU Xiaoming School of Mechanical Engineering,University of Science and Technology Beijing,Beijing ,China China National Machinery and Equipment Import and Export Corporation,Beijing ,China.Simulation of strip deformation in process of tension leveling[J].Journal of University of Science and Technology Beijing,2007(Z2). |
| |
| Authors: | LI Zhongfu WANG Wenguang BAI Jian XU Xiaoming School of Mechanical Engineering University of Science and Technology Beijing Beijing China China National Machinery and Equipment Import and Export Corporation Beijing China |
| |
| Institution: | LI Zhongfu1),WANG Wenguang1),BAI Jian1),XU Xiaoming2)1) School of Mechanical Engineering,University of Science and Technology Beijing,Beijing 100083,China 2) China National Machinery and Equipment Import and Export Corporation,Beijing 100055,China |
| |
| Abstract: | The characterization of tensile-bend deformation was the core of tension leveling technology and the essence of tensile-bend deformation was cyclic repeated bend of steel strip with tension.The tension leveling simulation model,which could simulate cyclic reserved bend of steel strip with tension,was established.The mechanism of strip plastic extension and flatness leveling was discovered by the results of simulation and analysis,and the application schedule of tension leveling technology was put forward. |
| |
| Keywords: | steel strip tension leveling simulation tension leveling technology |
| 本文献已被 CNKI 等数据库收录！ |
|
