| 空气锤上阀体多模膛模锻工艺的研究 |
| |
| 引用本文： | 刘忠德,王华冠,张强,韩向东.空气锤上阀体多模膛模锻工艺的研究[J].江苏大学学报(自然科学版),1993(4). |
| |
| 作者姓名： | 刘忠德 王华冠 张强 韩向东 |
| |
| 作者单位： | 江苏工学院机械制造系
(刘忠德，王华冠，张强)，江苏工学院机械制造系(韩向东) |
| |
| 摘 要： | 通过工艺实践,介绍了在空气自由锻锤上采用固定模多模膛模锻成形的工艺,使不锈钢阀体顺利成形的经验,说明了在锻造工艺和模具设计方面应注意的问题。
|
| 关 键 词： | 空气锤 模锻 工艺/多模膛 |
Technological Process of Valve Bodies Forged by Multiple Impression Die on Air Hammer |
| |
| Liu Zhongde Wang Huaguan Zhang Qiang Han Xiangdong.Technological Process of Valve Bodies Forged by Multiple Impression Die on Air Hammer[J].Journal of Jiangsu University:Natural Science Edition,1993(4). |
| |
| Authors: | Liu Zhongde Wang Huaguan Zhang Qiang Han Xiangdong |
| |
| Institution: | Liu Zhongde Wang Huaguan Zhang Qiang Han Xiangdong |
| |
| Abstract: | The authors deal with their experience accumulated in technological practice of stainless valve bodies forged by a fixed die on air hammer, and mention some of problems to which special attention should be paid in the design of the die. |
| |
| Keywords: | air hammers die forging technology/multiple impression forging |
| 本文献已被 CNKI 等数据库收录！ |
