| 基于ADAMS的两维/三维混合仿真研究 |
| |
| 引用本文： | 王立新,黄文良.基于ADAMS的两维/三维混合仿真研究[J].系统仿真学报,2005,17(8):2022-2024. |
| |
| 作者姓名： | 王立新 黄文良 |
| |
| 作者单位： | 1. 郑州大学机械工程学院,河南郑州,450001
2. 南京理工大学机械工程学院,江苏南京 210094 |
| |
| 摘 要： | 提出了在ADAMS中用两维曲线．曲线接触来代替实体-实体接触的方法，介绍了具体的实现过程，Autodesk Inventor中实体边界轮廓的提取和离散，ADAMS／Solver中的矩阵文件格式及生成，以无返回力矩钟表机构的调速器为例，比较和分析了两种结果。发现嵌入实体的曲线．曲线接触计算结果不但效率高而且准确度也好。
|
| 关 键 词： | 接触 两维／三维混合仿真 ADAMS Autodesk Inventor |
| 文章编号： | 1004-731X（2005）08-2022-03 |
| 收稿时间： | 2004-07-11 |
| 修稿时间： | 2004年7月11日 |
Study of 2D/3D Mixed Simulation Based on ADAMS |
| |
| WANG Li-xin,HUANG Wen-liang.Study of 2D/3D Mixed Simulation Based on ADAMS[J].Journal of System Simulation,2005,17(8):2022-2024. |
| |
| Authors: | WANG Li-xin HUANG Wen-liang |
| |
| Abstract: | The method of curve-curve contact instead of solid-solid contact is presented. The realization procedure, obtaining and discretizing of the edge of the solid-model in Autodesk Inventor, format of MATRIX in ADAMS/View were described in detail. As an example, the runaway escapement was simulated. Two kinds of results were discussed and analyzed. Both the calculation efficiency and the accuracy of curve-curve contact are better than the solid-slid contact. |
| |
| Keywords: | contact 2D/3D mixed simulation ADAMS Autodesk Inventor |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
