首页 | 本学科首页   官方微博 | 高级检索  
     

Ti(C,N)基金属陶瓷烧结性能及其组织的研究
引用本文:熊惟皓,胡镇华. Ti(C,N)基金属陶瓷烧结性能及其组织的研究[J]. 华中科技大学学报(自然科学版), 1997, 0(10)
作者姓名:熊惟皓  胡镇华
作者单位:华中理工大学模具技术国家重点实验室
基金项目:国家自然科学基金,湖北省自然科学基金,模具技术国家重点实验开放基金
摘    要:研究了温度与碳含量对Ti(C,N)基金属陶瓷烧结性能及组织的影响,研究结果表明:材料的抗弯强度对烧结温度最敏感,而密度、硬度、平均线收缩系数对烧结温度的敏感性依次递减;材料中碳粉含量增加时,会使其烧结温度明显降低,当添加量为2.2%时,金属陶瓷组织中会出现石墨相,使材料的抗弯强度下降.

关 键 词:Ti(C,N)基金属陶瓷;烧结温度;碳含量;烧结性能

Influence of Temperature and Carbon Content on Sintering Properties and Structure of Ti(C,N) Based Cermet
Xiong Weihao State Key Lab. of Dies Tech.,HUST,Wuhan ,China. Hu Zhenhua Cui Kun. Influence of Temperature and Carbon Content on Sintering Properties and Structure of Ti(C,N) Based Cermet[J]. JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE, 1997, 0(10)
Authors:Xiong Weihao State Key Lab. of Dies Tech.  HUST  Wuhan   China. Hu Zhenhua Cui Kun
Affiliation:Xiong Weihao State Key Lab. of Dies Tech.,HUST,Wuhan 430074,China. Hu Zhenhua Cui Kun
Abstract:The influence of temperature and carbon content on the sintering properties and structure of Ti(C,N) based cermet has been investigated. Experimental results show that the bending strength of the cermet is very sensitive to the sintering temperature, and the sensitivity of the density, hardness and average linear contraction coefficient to the sintering temperature is lower successively. When carbon content is increased, the sintering temperature is obviously decreased, and when the carbon added reaches 2.2 %, graphite phase is found in the structure and the bending strength is lowered.
Keywords:Ti(C  N) based cermet  sintering temperature  carbon content  sintering properties
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号