| 基于有限元方法的吊环数值仿真 |
| |
| 引用本文： | 许寿彭,马大为,冯勇,李志刚.基于有限元方法的吊环数值仿真[J].系统仿真学报,2006,18(12):3362-3364. |
| |
| 作者姓名： | 许寿彭 马大为 冯勇 李志刚 |
| |
| 作者单位： | 1. 南京理工大学,机械工程学院,江苏,南京,210094;防空兵指挥学院,河南,郑州,450052
2. 南京理工大学,机械工程学院,江苏,南京,210094 |
| |
| 摘 要： | 根据杆件弯曲变形的力学理论,结合实际工程问题,分析了某吊环的力学特性,并利用有限元分析软件对吊环进行了建模与计算。计算结果表明,用有限元分析软件解决工程实际问题是可行的。而后对吊环进行了重新设计,重新设计后的仿真结果显示,重新设计后的吊环的抗变形能力比新设计前的吊环有了显著的改善。应用该方法可对类似的构件变形问题提供参考。
|
| 关 键 词： | 有限元 仿真 吊环 建模 |
| 文章编号： | 1004-73IX（2006）12-3362-03 |
| 收稿时间： | 2005-09-12 |
| 修稿时间： | 2005-12-15 |
Numerical Simulation of Hoisting Ring Based on FEM |
| |
| XU Shou-peng,MA Da-wei,FENG Yong,LI Zhi-gang.Numerical Simulation of Hoisting Ring Based on FEM[J].Journal of System Simulation,2006,18(12):3362-3364. |
| |
| Authors: | XU Shou-peng MA Da-wei FENG Yong LI Zhi-gang |
| |
| Institution: | 1 .School of Mechanical Engineering, NUST, Nanjing 210094, China; 2.Air Defense Command College, Zhengzhou 450052, China |
| |
| Abstract: | Based on mechanics theory of bending distortion, the mechanics characteristic of hoisting ring was analyzed combined with engineering problem and it was calculated with FEM software. The result indicates that solving engineering problem with FEM software is feasible. Through optimizing design, the simulation result shows that there are more notable improvements on resist distortion than before. This method can offer reference for similar problem. |
| |
| Keywords: | Finite Element Method (FEM) simulation hoisting ring modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
