Effect of micro-alloying Ca on microstructure,texture and mechanical properties of Mg-Zn-Y-Ce alloys |
| |
Abstract: | Microstructure,texture and mechanical properties of Mg-5 Zn-0.3 Y-0.2 Ce alloys with the addition of trace xCa(x=0,0.3,0.6 wt%) were systematically investigated in this work.The results revealed that more secondary eutectic phases and smaller grain size of as-cast microstructure could be found with increasing Ca content.After hot extrusion,the Ca-free alloy showed a uniformly recrystallized grain structure,while the Ca-containing alloys possessed a bimodal grain structure composed of fine dynamic recrystallized(DRXed) grains with a size of several microns and un-recrystallized coarse grains.EBSD analysis showed that the three extruded alloys had a fiber texture of(0001) basal plane aligned with the extrusion direction.Texture intensity of the DRXed region was weaker than the deformed region.The extruded alloy with the addition of 0.6 wt% Ca exhibited the highest yield strength of 321 MPa due to the smallest DRXed grain size,the deformed region with strong basal texture and dense nanosized precipitates. |
| |
Keywords: | Ca micro-alloying Extrusion Microstructure Texture Mechanical properties Mg–Zn–Y–Ce alloy |
本文献已被 CNKI ScienceDirect 等数据库收录! |
|