| TiC_p/7075Al基复合材料半固态坯料二次加热组织 |
| |
| 引用本文： | 张复懿,刘慧敏,刘丽. TiC_p/7075Al基复合材料半固态坯料二次加热组织[J]. 北京科技大学学报, 2009, 31(12) |
| |
| 作者姓名： | 张复懿 刘慧敏 刘丽 |
| |
| 作者单位： | 1. 内蒙古工业大学材料科学与工程学院,呼和浩特,010051
2. 内蒙古工业大学材料科学与工程学院,呼和浩特,010051;内蒙古新材料工程技术中心,呼和浩特,010051 |
| |
| 摘 要： | 利用扫描电镜(SEM)、透射电镜(TEM)和示差扫描量热法(DSC)研究了4.4%TiC_p/7075Al基复合材料的二次加热组织演变规律及其影响因素. 结果表明:4.4%TiC_p/7075Al基复合材料的最佳二次加热工艺参数是加热温度为590～610℃,保温时间为10～20min;4.4%TiC_p/7075Al基复合材料在二次加热过程中具有较高的稳定性,随温度的升高和保温时间的延长,球形晶粒尺寸增加较小;4.4%TiC_p/7075Al基复合材料在600℃时的晶粒粗化速率常数为118.96μm~3·s~(-1),远小于7075基体合金的晶粒粗化速率常数311.7μm~3·s~(-1),更加适宜于半固态触变成形.
|
| 关 键 词： | 金属复合材料 半固态 触变成形 二次加热 |
Reheated microstructures of semi-solid ingots of TiC_p/7075Al composites |
| |
| ZHANG Fu-yi,LIU Hui-min,LIU Li. Reheated microstructures of semi-solid ingots of TiC_p/7075Al composites[J]. Journal of University of Science and Technology Beijing, 2009, 31(12) |
| |
| Authors: | ZHANG Fu-yi LIU Hui-min LIU Li |
| |
| Abstract: | The reheated microstructures and influencing factors of semi-solid ingots of 4.4%TiC_p/7075 composites were investigated by SEM, TEM and DSC. The results show that the optimal remelted parameters of 4.4%TiC_p/7075 composites are the remolded temperature of 590 to 610℃ and the holding time of 10 to 20min. 4.4%TiC_p/7075 composites are of high stability during the remelting process and the size of spherical grains can hardly increase with the increase of temperature and holding time. The coarsening velocity of grains in 4.4%TiC_p/7075 is 118.96μm~3·s~(-1), which is less than 311.7μm~3·s~(-1) for 7075 matrix alloy, and more suitable for semi-solid thixoforming. |
| |
| Keywords: | metal composites semi-solid thixoforming reheating |
| 本文献已被 万方数据 等数据库收录！ |
|
