首页 | 本学科首页   官方微博 | 高级检索  
     

轴向拉伸作用下对接焊缝连接性能的试验
引用本文:吴丽丽,雷飞龙,聂鑫. 轴向拉伸作用下对接焊缝连接性能的试验[J]. 清华大学学报(自然科学版), 2009, 0(9): 1446-1449
作者姓名:吴丽丽  雷飞龙  聂鑫
作者单位:清华大学,土木工程系,结构工程与振动教育部重点实验室,北京,100084;清华大学,土木工程系,结构工程与振动教育部重点实验室,北京,100084;清华大学,土木工程系,结构工程与振动教育部重点实验室,北京,100084
基金项目:中国博士后科学基金资助项目(20080430042);;清华大学-中大博士后科学基金资助项目
摘    要:焊接广泛应用于建筑结构的生产和装配领域。然而,目前专门针对焊缝连接性能的试验研究较少,为此,设计了一组一级对接焊缝连接试件(Q345钢),通过对试件进行全过程轴向拉伸试验,研究焊缝连接的延性和承载性能,并将其结果与同规格尺寸的一组完整母材试件的拉伸结果进行了对比。试验结果表明:当焊缝质量得到保证的前提下,对接焊缝连接试件比母材提前进入屈服阶段,即对接焊缝对构件的弹性工作性能有一定程度的影响,但其极限强度能够达到母材的强度。此外,构件的延性有所降低,焊缝热影响区钢材的拉伸性能削弱较小。

关 键 词:对接焊缝  轴向拉伸  延性

Experiment of butt-welded connections subjected to axial tension
WU Lili,LEI Feilong,NIE Xin. Experiment of butt-welded connections subjected to axial tension[J]. Journal of Tsinghua University(Science and Technology), 2009, 0(9): 1446-1449
Authors:WU Lili  LEI Feilong  NIE Xin
Affiliation:Key Laboratory of Structural Engineering and Vibration of Ministry of Education;Department of Civil Engineering;Tsinghua University;Beijing 100084;China
Abstract:Welding is widely used in the production and assembly of structural components. However,there are few experimental studies focusing on the behavior of welded connections.A group of butt-welded steel components(sample material Q345) was used in axial tensile experiments of the butt-welded connections to measure the ductility and loading capacities of connections.The results were compared with plates of the same material and size but without welds.The butt-welded components reach the yield stage earlier than ...
Keywords:butt welding  axial tension  ductility  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号