| 切削油对工件表面粗糙度的影响 |
| |
| 引用本文： | 贾晓鸣,穆兰.切削油对工件表面粗糙度的影响[J].河北理工学院学报,2000,22(3):11-14. |
| |
| 作者姓名： | 贾晓鸣 穆兰 |
| |
| 作者单位： | [1]河北理工学院机械系 [2]河北理工学院 |
| |
| 摘 要： | 在切削加工中，合理使用发削油能显著降低工件表面粗糙度。研究表明：（１）切削油的粘度越小，刚切削油的润滑效果越好，切削力越小；（２）进给量和切削深度愈大，则切削油润滑效果愈差，切削力和工件表面粗糙度下降的幅度愈小，进给量的影响尤为明显。
|
| 关 键 词： | 切削油 表面粗糙度 渗透 润滑 |
The effect of the cutting oil on the surface roughness of the workpiece |
| |
| JIA Xiao ming ,CHANG Xiu hui ,MU Lan ,DU Ming hua.The effect of the cutting oil on the surface roughness of the workpiece[J].Journal of Hebei Institute of Technology,2000,22(3):11-14. |
| |
| Authors: | JIA Xiao ming CHANG Xiu hui MU Lan DU Ming hua |
| |
| Institution: | JIA Xiao ming 1,CHANG Xiu hui 1,MU Lan 2,DU Ming hua 1 |
| |
| Abstract: | The surface roughness of the workpiece can notablly be deduced using the cutting oil during maching.The study showed that the less viscosity of cutting oil,the better the lubrication effect of cutting oil and the lower the cutting force was,and that the feed and depth of cut was increased,the lubrication effect of cutting oil became poor,and the readucing extent of the cutting force and surface roughness was reduced,and the effect of feed was specially obvious. |
| |
| Keywords: | cutting oic surfact roughness penetration lubrication |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
