| 磨料射流固液两相流场的数值模拟 |
| |
| 引用本文： | 张永利,于欢,马玉林. 磨料射流固液两相流场的数值模拟[J]. 辽宁工程技术大学学报(自然科学版), 2011, 30(3): 385-388. DOI: CNKI：21-1379/N.20110603.0023.004 |
| |
| 作者姓名： | 张永利 于欢 马玉林 |
| |
| 作者单位： | 1. 辽宁工程技术大学力学与工程学院,辽宁阜新,123000
2. 中石化股份有限公司河南油田分公司石油工程技术研究院,河南南阳,473132 |
| |
| 基金项目： | 辽宁省教育厅基金资助项目(05L167) |
| |
| 摘 要： | 为了解决磨料射流固、液两相流场运动对割缝效果的影响问题,采用数值模拟的方法,通过建立磨料射流固、液两相流场的数学模型,研究了磨料两相射流割缝的速度场和流动场规律。结果表明:磨料射流中割缝速度可达100 m/s左右,有利于有效割缝;有效割缝需要入射压力至少达到25 Mpa;磨料射流割缝过程中会形成了一道"水墙"阻止磨料射流全部高速射出。产生二次回流。虽然二次加速的效果有限,但二次循环的水和颗粒经过二次加速能够再一次对壁面形成高速打击,提高割缝效率。研究成果对磨料两相射流割缝提高油井采收率具有指导意义。
|
| 关 键 词： | 磨料射流 两相流 割缝 数值模拟 回流 |
Numerical simulation of liquid-solid two phase flow field for abrasive water jet |
| |
| ZHANG Yongli,YU Huan,MA Yulin. Numerical simulation of liquid-solid two phase flow field for abrasive water jet[J]. Journal of Liaoning Technical University (Natural Science Edition), 2011, 30(3): 385-388. DOI: CNKI：21-1379/N.20110603.0023.004 |
| |
| Authors: | ZHANG Yongli YU Huan MA Yulin |
| |
| Affiliation: | ZHANG Yongli1,YU Huan2,MA Yulin1(1.College of Mechanics and Engineering,Liaoning Technical University,Fuxin 123000,China,2.SINOPEC Research Institute of Petroleum Engineering,SINOPEC Henan Oilfield Company,Nanyang 473132,China) |
| |
| Abstract: | In order to understand the impact on abrasive hydraulic slotting by liquid-solid two phase flow field,this study has developed a mathematical model of liquid-solid two phase flow field for abrasive water jet,and investigated the velocity field and fluid field of abrasive hydraulic slotting.The study shows that the cutting speed using abrasive water jet can reach approaximately 100 m/s,which is benefical to slot cutting.The incident pressure for an effective slotting is at least 25Mpa.A water wall will be fo... |
| |
| Keywords: | abrasive water jet liquid-solid two-phase flow slotting numerical simulation reverse current |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
