| 考虑空隙率修正的铅挤压阻尼器刚塑性模型 |
| |
| 引用本文： | 杨明飞,徐赵东,张香成. 考虑空隙率修正的铅挤压阻尼器刚塑性模型[J]. 华中科技大学学报(自然科学版), 2012, 40(3): 85-88 |
| |
| 作者姓名： | 杨明飞 徐赵东 张香成 |
| |
| 作者单位： | 1. 东南大学混凝土及预应力混凝土结构教育部重点实验室,江苏南京210096／安徽理工大学土木建筑学院,安徽淮南232001
2. 东南大学混凝土及预应力混凝土结构教育部重点实验室,江苏南京,210096 |
| |
| 基金项目： | 国家高技术研究发展计划资助项目,江苏省科技支撑计划资助项目,国家自然科学基金重大研究计划资助项目,江苏省普通高校研究生科研创新计划资助项目 |
| |
| 摘 要： | 研究了铅挤压阻尼器中铅的受力特点,考虑灌铅过程中可能引起阻尼器内部出现的空隙对铅挤压阻尼器滞回曲线的影响,修正了刚塑性模型.使用Deform3D建立了铅挤压阻尼器的有限元模型,在考虑4种不同空隙率条件下,模拟了2种位移幅值的滞回曲线.结果表明：空隙对铅挤压阻尼器挤压力的影响较小,但是对耗能能力的影响较大,由修正刚塑性模型计算得到的阻尼器耗能能力更加合理.
|
| 关 键 词： | 体积补偿 滞回曲线 铅挤压阻尼器 孔隙率 修正刚塑性模型 |
Rigid-plastic model for lead extrusion damper with voidage modification |
| |
| Yang Mingfei,Xu Zhaodong,Zhang Xiangcheng. Rigid-plastic model for lead extrusion damper with voidage modification[J]. JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE, 2012, 40(3): 85-88 |
| |
| Authors: | Yang Mingfei Xu Zhaodong Zhang Xiangcheng |
| |
| Affiliation: | 1(1 Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University,Nanjing 210096,China;2 School of Civil Engineering,Anhui University of Science and Technology,Huainan 232001,China) |
| |
| Abstract: | The mechanical characteristics of lead in a lead extrusion damper(LED) was studied,and voids within the damper caused by the process of irrigation lead were considered,in which the hysteresis loop of LED was affected significantly.The rigid-plastic model was modified.Finite element model of LED was established by Deform3D software,and meanwhile four different voids were considered separately for simulation.Results show that the extrusion force of lead extrusion damper is less affected by the voidage,but the energy dissipation capacity is affected significantly,and dissipation energy calculated by the modified rigid plastic model is more reasonable. |
| |
| Keywords: | volume compensation hysteresis loop lead extrusion damper void ratio modified rigid-plastic model |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
