| 电解法生产低钛铝合金的可行性研究 |
| |
| 引用本文： | 宋天福,刘忠侠,王明星,刘志勇,霍裕平.电解法生产低钛铝合金的可行性研究[J].郑州大学学报(理学版),2004,36(1):37-40. |
| |
| 作者姓名： | 宋天福 刘忠侠 王明星 刘志勇 霍裕平 |
| |
| 作者单位： | 郑州大学河南省材料物理重点实验室,郑州,450052 |
| |
| 摘 要： | 研究了电解质中加入少量TiO2生产低钛铝合金的可行性并进行了工业化生产试验.结果表明,在电解质中添加少量TiO2对电解槽工艺参数没有影响;Ti对合金晶粒尺寸具有明显的细化效果;电解法生产低钛铝合金在理论上和生产上都是可行的.
|
| 关 键 词： | 低钛铝合金 电解法 晶粒细化 |
| 文章编号： | 1671-6841(2004)01-0037-04 |
| 修稿时间： | 2003年8月21日 |
Feasibility on Electrolytic Production of Low-Titanium Aluminum Alloy |
| |
| Song Tianfu,Liu Zhongxia,Wang Mingxing,Liu Zhiyong,Huo Yuping.Feasibility on Electrolytic Production of Low-Titanium Aluminum Alloy[J].Journal of Zhengzhou University:Natural Science Edition,2004,36(1):37-40. |
| |
| Authors: | Song Tianfu Liu Zhongxia Wang Mingxing Liu Zhiyong Huo Yuping |
| |
| Abstract: | The production feasibility of Aluminum alloy with low Ti content is investigated by adding a small quantity of TiO 2 into electrolyte. The fall scale production test is also conducted. The results show that a small quantity of TiO 2 added into electrolyte almost has no influence on the process parameters of electrolytic tanks .The grain of alloy is obviously refined when the alloy contains a low content of Ti. It is feasible to produce Aluminum alloy with low Ti content by means of electrolytic process as the same parameters as that of pure Aluminum production whether by theory or practice |
| |
| Keywords: | low-Titanium Aluminum alloy electrolytic method grain refinement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
