| 泡沫模密度对消失模-型壳铸造件表面质量的影响 |
| |
| 引用本文： | 蒋文明,樊自田,廖德锋,刘德均.泡沫模密度对消失模-型壳铸造件表面质量的影响[J].华中科技大学学报(自然科学版),2011(2):64-67. |
| |
| 作者姓名： | 蒋文明 樊自田 廖德锋 刘德均 |
| |
| 作者单位： | 华中科技大学材料成形与模具技术国家重点实验室; |
| |
| 基金项目： | 国家高技术研究发展计划资助项目(2007AA03Z113) |
| |
| 摘 要： | 综合考察泡沫模对消失模-型壳复合铸造的铸件表面质量和失模过程的影响,借助TGA和DSC等手段从失重、玻璃化转变、发气量和发气速度及体积变化等方面分析不同密度泡沫模的特性,研究泡沫模密度对泡沫模、型壳和铸件表面粗糙度以及失模过程的影响规律.结果表明:随着泡沫模密度的增大,泡沫模、型壳及最终铸件的表面粗糙度降低.高密度泡沫模的起始失重和玻璃化转变温度略有提高.随着泡沫模密度的增大,泡沫模的发气量、发气速度和体积变化不断增大,同时会大大增加型壳在失模过程中的开裂倾向.综合考虑泡沫模对铸件表面质量和失模过程的影响,泡沫模的密度应控制在0.050～0.065g/cm3之间.
|
| 关 键 词： | 消失模-型壳复合铸造 泡沫模 密度 表面粗糙度 失模 |
Influence of foam pattern density on the surface roughness of expendable pattern-shell compound casting |
| |
| Jiang Wenming,Fan Zitian,Liao Defeng,Liu Dejun.Influence of foam pattern density on the surface roughness of expendable pattern-shell compound casting[J].JOURNAL OF HUAZHONG UNIVERSITY OF SCIENCE AND TECHNOLOGY.NATURE SCIENCE,2011(2):64-67. |
| |
| Authors: | Jiang Wenming Fan Zitian Liao Defeng Liu Dejun |
| |
| Institution: | Jiang Wenming,Fan Zitian,Liao Defeng,Liu Dejun(State Key Laboratory of Material Processing and Die and Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China) |
| |
| Abstract: | Influences of foam pattern on surface roughness of castings and removing pattern process in the expendable pattern-shell compound casting were investigated,and the characteristic including loss weight,vitrification transition,producing-gas quantity,producing-gas velocity,and volume change for foam pattern with different densities were analyzed by using the thermogravimetric analysis(TGA),and the differential scanning calorimetry(DSC) methods.Meanwhile,the influences of density of foam pattern on the surface... |
| |
| Keywords: | expendable pattern-shell compound casting foam pattern density surface roughness removing pattern |
| 本文献已被 CNKI 等数据库收录！ |
|
