首页 | 本学科首页   官方微博 | 高级检索  
     检索      

爆炸压涂碰撞速度对铜涂层性能影响研究
引用本文:杜长星,赵铮,王金相.爆炸压涂碰撞速度对铜涂层性能影响研究[J].科学技术与工程,2015,15(7):154-157.
作者姓名:杜长星  赵铮  王金相
作者单位:南京理工大学,南京,210094
基金项目:国家自然科学基金项目(面上项目,重点项目,重大项目);中国博士后科学基金
摘    要:研究了碰撞速度对爆炸压涂铜涂层性能的影响,首先利用SPH无网格法模拟了爆轰驱动飞板的加速过程,计算出了飞板碰撞速度-炸高曲线.然后,在三种碰撞速度下进行了铜粉-铜板爆炸压涂实验,碰撞速度分别为700 m/s、900 m/s和1 100 m/s.通过对试样进行宏观观察、光学显微观察和显微硬度测试,得出碰撞速度为900 m/s时铜涂层的质量最佳.其铜涂层由8层颗粒组成,厚度达到300 μm,显微硬度为114HV,接近冷轧铜板的显微硬度.

关 键 词:爆炸压涂  铜涂层  碰撞速度  数值模拟
收稿时间:2014/10/21 0:00:00
修稿时间:2014/11/17 0:00:00

Influence of impact velocity on the properties of copper coating prepared by explosive compaction-coating
Du Chang-xing,and Wang Jing-xiang.Influence of impact velocity on the properties of copper coating prepared by explosive compaction-coating[J].Science Technology and Engineering,2015,15(7):154-157.
Authors:Du Chang-xing  and Wang Jing-xiang
Institution:School of Energy and Power Engineering,Nanjing University of Science and Technology;Jiangsu,China;State Key Laboratory of Transient Physics,Nanjing University of Science and Technology;Jiangsu,China
Abstract:
Keywords:explosive compaction-coating  copper coating  impact velocity  numerical simulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《科学技术与工程》浏览原始摘要信息
点击此处可从《科学技术与工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号