| 钢水测温传感器的有限元分析 |
| |
| 引用本文： | 张华,刘卫,谢植. 钢水测温传感器的有限元分析[J]. 东北大学学报(自然科学版), 2006, 27(12): 1315-1318. DOI: - |
| |
| 作者姓名： | 张华 刘卫 谢植 |
| |
| 作者单位： | 东北大学,信息科学与工程学院,辽宁,沈阳,110004;东北大学,信息科学与工程学院,辽宁,沈阳,110004;东北大学,信息科学与工程学院,辽宁,沈阳,110004 |
| |
| 摘 要： | 在分析钢水测温传感器传热过程的基础上,建立了测温传感器的有限元模型.基于此模型对传感器内外层结构、物性参数和边界条件等影响传感器温度测量的各个因素进行分析.实验结果表明仿真值与测量值相比最大误差小于6 K;传感器滞后主要取决于外层保护套管;传感器物性参数可以取为常数;当对流换热系数足够大时,再改变对流换热系数对温度影响较小.这些结果可为传感器的优化设计和实际使用提供理论依据,且可在基于模型的反演算法中提供正向解.
|
| 关 键 词： | 传感器 温度测量 有限元 传热模型 钢水 |
| 文章编号： | 1005-3026(2006)12-1315-04 |
| 修稿时间： | 2006-04-10 |
Finite Element Analysis of Thermometric Sensor for Liquid Steel |
| |
| ZHANG Hua,LIU Wei,XIE Zhi. Finite Element Analysis of Thermometric Sensor for Liquid Steel[J]. Journal of Northeastern University(Natural Science), 2006, 27(12): 1315-1318. DOI: - |
| |
| Authors: | ZHANG Hua LIU Wei XIE Zhi |
| |
| Affiliation: | (1) School of Information Science and Engineering, Northeastern University, Shenyang 110004, China |
| |
| Abstract: | Analyzing the heat transfer of thermometric sensor for liquid steel,a relevant finite element model is developed for the sensor.Influencing factors on thermometry such as the structure of the sensor inner and outer layers,thermal properties and boundary conditions are discussed.Numerical simulation results revealed that the max error between modeling value and experimental value is less than 6K.The thermometric lag mainly depends on the properties of protective sheath,and the thermal parameter of the sensor can be regarded as a constant.If the convective heat transfer coefficient is great enough,its rechange has smaller effect on temperature response.These results can provide a theoretical basis for sensor optimum design and its application. |
| |
| Keywords: | sensor thermometry finite element heat transfer model liquid steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《东北大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《东北大学学报(自然科学版)》下载全文 |
|
