| Al,K和Si对钼粉还原及烧结过程的影响 |
| |
| 引用本文： | 卜春阳,李文虎,刘博洲,董洪峰,王娜,庄飞.Al,K和Si对钼粉还原及烧结过程的影响[J].上海理工大学学报,2018,39(2):18-22. |
| |
| 作者姓名： | 卜春阳 李文虎 刘博洲 董洪峰 王娜 庄飞 |
| |
| 作者单位： | 金堆城钼业集团有限公司技术中心, 陕西 西安 710077,陕西理工大学 材料科学与工程学院, 陕西 汉中 723000,陕西理工大学 材料科学与工程学院, 陕西 汉中 723000,陕西理工大学 材料科学与工程学院, 陕西 汉中 723000,金堆城钼业集团有限公司技术中心, 陕西 西安 710077,金堆城钼业集团有限公司技术中心, 陕西 西安 710077 |
| |
| 基金项目： | 陕西省科技统筹创新工程计划项目（S2015TNGY0050） |
| |
| 摘 要： | 采用液固掺杂技术将不同含量的KOH，H2SiO3和Al（NO3）3·9H2O溶液加入到MoO2粉末中，并通过还原、压制和烧结工艺制备成钼棒。研究了掺杂钼粉的平均费氏粒度、松装密度与掺杂量的关系，采用扫描电子显微镜（SEM）对掺杂钼粉的表面形貌及烧结钼棒的断口形貌进行了分析。研究结果表明，随着K，Al和Si掺杂量的提高，钼粉的粒度及松装密度均呈先减小后增大的变化趋势，且钼棒晶粒中的气孔呈增多趋势。通过SEM分析发现，由于K，Al和Si的掺杂，烧结钼棒的断裂形貌由沿晶断裂逐渐向穿晶断裂转变。综合比较后认为，Mo-0.005Al-0.27K-0.098Si和Mo-0.005Al-0.36K-0.1305Si为最优配方。
|
| 关 键 词： | 钼粉 掺杂 力学性能 断口形貌 |
| 收稿时间： | 2017/9/13 0:00:00 |
Effect of Al, K and Si on Reduction and Sintering Process of Molybdenum Powder |
| |
| BU Chunyang,LI Wenhu,LIU Bozhou,DONG Hongfeng,WANG Na and ZHUANG Fei.Effect of Al, K and Si on Reduction and Sintering Process of Molybdenum Powder[J].Journal of University of Shanghai For Science and Technology,2018,39(2):18-22. |
| |
| Authors: | BU Chunyang LI Wenhu LIU Bozhou DONG Hongfeng WANG Na and ZHUANG Fei |
| |
| Institution: | Jinduicheng Molybnenum Group Co., Ltd., Center of Technology, Xi''an 710077, China,School of Material Science and Engineering, Shaanxi University of Technology, Hanzhong 723000, China,School of Material Science and Engineering, Shaanxi University of Technology, Hanzhong 723000, China,School of Material Science and Engineering, Shaanxi University of Technology, Hanzhong 723000, China,Jinduicheng Molybnenum Group Co., Ltd., Center of Technology, Xi''an 710077, China and Jinduicheng Molybnenum Group Co., Ltd., Center of Technology, Xi''an 710077, China |
| |
| Abstract: | The different contents of KOH,H2SiO3 and Al(NO3)3·9H2O solution were added into MoO2 powder,and the molybdenum rods were prepared by reduction,suppression and sintering process.The relationship between the average particle size of Fisher and apparent density with the doping amount of Al,K,Si was studied.The surface morphology of doped molybdenum powder and the fracture appearance of molybdenum rods were analyzed by SEM.The results show that,the grain size and apparent density of molybdenum powder decrease first and then increase,but the porosity in molybdenum rod increases all the time with increasing of kalium,aluminium and silicon.It was found that the fracture morphology of sintered molybdenum rod changed from intergranular fracture to transgranular fracture by SEM analysis due to the doping of kalium,aluminium and silicon.After comprehensive comparison,Mo-0.005Al-0.27K-0.098Si and Mo-0.005Al-0.36K-0.1305Si were confirmed as the better formula. |
| |
| Keywords: | molybdenum powder doping mechanical properties appearance of fracture |
|
| 点击此处可从《上海理工大学学报》浏览原始摘要信息 |
| 点击此处可从《上海理工大学学报》下载免费的PDF全文 |
|
