| 离心泵输送粘性流体时叶轮出口宽度的设计 |
| |
| 引用本文： | 陈晓玲,张武高,黄震.离心泵输送粘性流体时叶轮出口宽度的设计[J].上海交通大学学报,2002,36(11):1693-1696,1702. |
| |
| 作者姓名： | 陈晓玲 张武高 黄震 |
| |
| 作者单位： | 上海交通大学,机械与动力工程学院,上海,200030 |
| |
| 基金项目： | 国家博士点基金资助项目 (944 2 5 0 2 ) |
| |
| 摘 要： | 粘性流体在离心泵内流动时，叶轮流道内附面层变厚，流动排挤作用增强，在计算分析叶片边界层厚度的基础上，建立了新的叶轮出口宽度设计方法，针对一种离心泵，在一定输送介质粘度范围内，设计了3种不同出口宽度的离心叶轮，实验研究了叶轮出口宽度对离心泵性能的影响，并与常规的离心水泵叶轮进行性能对比，验证了输送粘性流体时叶轮出口宽度的设计新方法。
|
| 关 键 词： | 离心泵 粘性流体 叶轮 出口宽度 设计方法 |
| 文章编号： | 1006-2467(2002)11-1693-04 |
Design Method of the Outlet Width of Centrifugal Pump When Handling Viscous Medium |
| |
| CHEN Xiao ling,ZHANG Wu gao,HUANG Zhen.Design Method of the Outlet Width of Centrifugal Pump When Handling Viscous Medium[J].Journal of Shanghai Jiaotong University,2002,36(11):1693-1696,1702. |
| |
| Authors: | CHEN Xiao ling ZHANG Wu gao HUANG Zhen |
| |
| Abstract: | From the influence of viscosity of pumping medium on the boundary layer of centrifugal impeller, this paper presented the calculating methods of impeller boundary layer and outlet width. According to the calculation results, three different outlet impellers were designed for a certain range viscosity of pumping medium. The influence of outlet width of impeller on the performance of centrifugal pump was studied experimentally when handling different viscous fluids. The test results were also compared with that which is designed according to the method when handling water. At last, the design method of impeller outlet width were verified when pumping viscous medium. |
| |
| Keywords: | centrifugal pumps viscous fluids impellers outlet width design method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
