首页 | 本学科首页   官方微博 | 高级检索  
     检索      

管内竖直向上固液两相流固相非均匀分布及其机理分析
引用本文:刘中良,施明恒,戴锅生.管内竖直向上固液两相流固相非均匀分布及其机理分析[J].中国石油大学学报(自然科学版),1997(5).
作者姓名:刘中良  施明恒  戴锅生
作者单位:石油大学机械系!山东东营,257062(刘中良),东南大学(施明恒,戴锅生)
基金项目:国家自然科学基金!59276256
摘    要:根据粒径和流量的不同,管内竖直向上固液两相流动可能会出现四种基本流型,即固定床模式、局部流化模式、充分流化模式和水力输送模式.在充分流化模式中,固相存在着明显的轴向分布不均匀性.通过对轴向分布不均匀性现象的详尽的观察与分析,提出了逐层流化-壁面效应机理模型,给出了床体膨胀曲线的测量结果,并指出,稳定流化的流量操作范围窄是固液流化床的固有特性。

关 键 词:固相  液相  流体流动  非均匀分布  机理

NON-UNIFORMITIES OF SOLID-LIQUID IN-TUBE VERTICAL TWO-PHASE FLOW AND ITS MECHANISM ANALYSIS
Liu Zhongliang, Shi Mingheng, Dai Guosheng.NON-UNIFORMITIES OF SOLID-LIQUID IN-TUBE VERTICAL TWO-PHASE FLOW AND ITS MECHANISM ANALYSIS[J].Journal of China University of Petroleum,1997(5).
Authors:Liu Zhongliang  Shi Mingheng  Dai Guosheng
Institution:Liu Zhongliang; Shi Mingheng; Dai Guosheng
Abstract:An experimental study is made of the flow regime observation of solid-liquid in-tube vertical twophase flows. According to the particle size and the liquid flowrate, four differcnt flow regimes are observed. It is found that the soid phase displays strong non-uniformities. The mechanism of this non-uniformity is profoundly analyzed, and thus a layer-by-layer fluidization-wall effect model is proposcd to cxplain the phenomcnon. The bed expansion curves are also mcasured for various operation conditions. It is concluded from the results that the flowrate range of the steady fluidization is very narew for solid-liquid fluidization.
Keywords:Solid phase  Liquid phase  Fluid flow  Non-uniformity  Mechanism
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号