首页 | 本学科首页   官方微博 | 高级检索  
     检索      

聚硅酸铝铁的制备及其对含Ni2+废水的吸附性能
引用本文:曹书勤,缑星,赵艳格.聚硅酸铝铁的制备及其对含Ni2+废水的吸附性能[J].信阳师范学院学报(自然科学版),2012(4):505-507.
作者姓名:曹书勤  缑星  赵艳格
作者单位:信阳师范学院化学化工学院
基金项目:河南省科技攻关项目(112102310579)
摘    要:通过正交试验,确定聚硅酸铝铁的最佳制备条件为n(聚硅酸):n(Al3+)=2:1,n(聚硅酸):n(Fe3+)=2:1,浸出液pH为4.3,熟化温度为60℃.用分光光度法研究其对Ni2+的吸附性能,结果表明:当废水pH为8.0、絮凝剂用量为20 mL/L时,Ni2+去除率达92.7%,沉降时间为16 min.

关 键 词:分光光度法  粉煤灰  聚硅酸铝铁  絮凝剂  含镍废水

Preparation of Polysilicate Aluminum Ferrit and Its Adsorption Properties on Nickel-containing Wastewater
CAO Shu-Qin,GOU Xing,ZHAO Yan-ge.Preparation of Polysilicate Aluminum Ferrit and Its Adsorption Properties on Nickel-containing Wastewater[J].Journal of Xinyang Teachers College(Natural Science Edition),2012(4):505-507.
Authors:CAO Shu-Qin  GOU Xing  ZHAO Yan-ge
Institution:(College of Chemistry and Chemical Engineering,Xinyang Normal University,Xinyang 464000,China)
Abstract:The optimum experimental conditions for preparation of polysilicate aluminum ferrit were obtained by orthogonal test.Nickel-containing wastewater was treated with polysilicate aluminum ferrit and the removal rate was determined by spectrophotometry.The results showed that the removal rate of Ni2+ could reach 92.7% when n(polysilicate) : n(Al3+) was 2∶ 1,n(polysilicate)∶ n(Fe3+) was 2∶ 1,temperature was 60 ℃,wastewater pH was 8,and the usage of flocculant was 20 mL/L,and sedimentation time was 16 min,respectively.
Keywords:speetrophotometry  fly ash  polysilicate aluminum ferrit  flocculant  nickel-containing wastewater
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号