首页 | 本学科首页   官方微博 | 高级检索  
     

点支式幕墙中空玻璃承载性能的理论和试验研究
引用本文:殷永炜,张其林,王丹,黄庆文. 点支式幕墙中空玻璃承载性能的理论和试验研究[J]. 同济大学学报(自然科学版), 2005, 33(11): 1433-1437
作者姓名:殷永炜  张其林  王丹  黄庆文
作者单位:1. 同济大学,建筑工程系,上海,200092
2. 中国矿业大学,力学与建筑工程学院,北京,100083
3. 广东金刚玻璃科技有限公司,广东,汕头,515063
摘    要:进行了点支式中空玻璃承载性能的试验,测得了点支式中空玻璃的荷载-位移及荷载-应力曲线.在试验的基础上,通过对不同厚度点支式中空玻璃的有限元分析,对现行的《点支式玻璃幕墙工程技术规程》(CECS127:2001)关于中空玻璃等效厚度取值进行了修正,给出了修正系数,同时也给出了点支式中空玻璃最大应力和最大位移的建议计算公式.为今后规程的进一步完善和修订做了一些探讨工作.

关 键 词:中空玻璃 点支式 试验 有限元分析 等效厚度
文章编号:0253-374X(2005)11-1433-05
收稿时间:2004-06-08
修稿时间:2004-06-08

Theoretical and Experimental Studies on Load-Bearing Capacity of Point-Supported Mid-hollow Glass
YIN Yong-wei,ZHANG Qi-lin,WANG Dan,HUANG Qing-wen. Theoretical and Experimental Studies on Load-Bearing Capacity of Point-Supported Mid-hollow Glass[J]. Journal of Tongji University(Natural Science), 2005, 33(11): 1433-1437
Authors:YIN Yong-wei  ZHANG Qi-lin  WANG Dan  HUANG Qing-wen
Abstract:An experimental investigation was made on load-bearing capacity of point-supported mid-hollow glass.Through finite element analysis on point-supported midhollow glass with various thicknesses,the value of equivalent thickness of mid-hollow glass given in 'Technical Specification for Point Supported Glass Curtain Wall' is revised and corresponding revised coefficient is given.Meanwhile the formulas for calculating max displacement and max stress of point-supported mid-hollow glass curtain wall are suggested.
Keywords:mid-hollow glass   point-supported   test   finite element analysis   equivalent thickness
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号