| 负载戊二酸锌催化合成聚甲基乙撑环己撑碳酸酯 |
| |
| 引用本文： | 吴静姝,贺虎,肖敏,王拴紧,孟跃中.负载戊二酸锌催化合成聚甲基乙撑环己撑碳酸酯[J].中山大学学报(自然科学版),2009,48(Z2). |
| |
| 作者姓名： | 吴静姝 贺虎 肖敏 王拴紧 孟跃中 |
| |
| 作者单位： | 中山大学理工学院环境材料研究所,广东,广州,510275 |
| |
| 基金项目： | 国家科技部引导性重点攻关资助项目，广东省自然科学基金团队项目 |
| |
| 摘 要： | 为了提高PPC的热性能和力学性能,在合成过程中加入第三单体环氧环己烷.负载锌类催化PO(环氧丙烷),CHO(环氧环己烷),和CO2三元聚合压力为5.2 MPa,最佳反应温度是80℃,参与反应的单体转化率高达89.97%.实验表明,对PPC催化效率很高的负载戊二酸锌对三元共聚有很好的催化作用.三元共聚物具有良好的热性能.
|
| 关 键 词： | 三元共聚 环氧环己烷 环氧丙烷 二氧化碳 |
Terpolymerization of Carbon Dioxide, Propylene Oxide and Cyclohexene Oxide by Supported Zinc Glutarate |
| |
| WU Jingshu,HE Hu,XIAO Min,WANG Shuanjin,MENG Yuezhong.Terpolymerization of Carbon Dioxide, Propylene Oxide and Cyclohexene Oxide by Supported Zinc Glutarate[J].Acta Scientiarum Naturalium Universitatis Sunyatseni,2009,48(Z2). |
| |
| Authors: | WU Jingshu HE Hu XIAO Min WANG Shuanjin MENG Yuezhong |
| |
| Abstract: | To improve the thermal properties of poly (propylene carbonate) (PPC), cyclohexene oxide (CHO) was introduced into the polymerization. The terpolymerization can be carried out under 5.2 MPa in the presence of supported zinc catalyst. The most appro-pilate temperature was around 80 ℃, and the highest conversion of epoxides was up to 89. 97 %. Supported zinc glutarate was found to be effective catalyst not only the copolymerization of PO and CO2 but also the terpolymerization of PO, CHO and CO2. The thermal and mechanical properties of the terpolymers (PPCHC) were increased. |
| |
| Keywords: | terpolymerization cyclohexene oxide propylene oxide carbon dioxide |
| 本文献已被 万方数据 等数据库收录！ |
|
