| 铝-金属玻璃-铝复合板的抗破甲性能研究 |
| |
| 引用本文： | 刘伟东,冯荣欣,刘凯欣,闫鸿浩,李晓杰. 铝-金属玻璃-铝复合板的抗破甲性能研究[J]. 北京大学学报(自然科学版), 2010, 46(5): 779-783 |
| |
| 作者姓名： | 刘伟东 冯荣欣 刘凯欣 闫鸿浩 李晓杰 |
| |
| 作者单位： | 1. 北京大学工学院,湍流与复杂系统国家重点实验室, 北京 100871; 2. 大连理工大学工程力学系,大连 116023; |
| |
| 摘 要： | 利用爆炸焊接技术成功制备出铝-金属玻璃-铝三层复合板, 并对其抗破甲性能进行了试验及数值分析。针对复合板的尺寸较小的特点, 建立了适用于小试件( 特征尺寸小于 50 mm) 的破甲实验方案;基于动力学软件ANSYS/ LS-DYNA 提出了一套对破甲过程进行数值模拟的计算方案。研究结果表明, 破甲试验装置产生的聚能射流直径较小、稳定性良好, 铝-金属玻璃-铝三层复合板在聚能射流作用下其上表面呈大范围的花瓣形破坏, 中间层的金属玻璃材料呈粉末状破碎, 对后续的射流过程起到了干扰的作用; 计算方案可有效地模拟聚能射流的形成及其对铝-金属玻璃-铝三层复合板的侵彻; 数值模拟得到的破甲深度、稳定阶段侵彻通道的直径、材料的破坏模式与实验结果相符。
|
| 关 键 词： | 爆炸力学 金属玻璃 聚能装药 射流 侵彻 |
| 收稿时间： | 2009-08-31 |
Research on the Property of Aluminum-Metallic Glass-Aluminum Sandwich Panel against Shaped Charge Jet Penetration |
| |
| LIU Weidong,FENG Rongxin,LIU Kaixin,YAN Honghao,LI Xiaojie. Research on the Property of Aluminum-Metallic Glass-Aluminum Sandwich Panel against Shaped Charge Jet Penetration[J]. Acta Scientiarum Naturalium Universitatis Pekinensis, 2010, 46(5): 779-783 |
| |
| Authors: | LIU Weidong FENG Rongxin LIU Kaixin YAN Honghao LI Xiaojie |
| |
| Affiliation: | 1. State Key Laboratory of Turbulence and Complex Systems, College of Engineering, Peking University, Beij ing 100871; 2. Department of Engineering Mechanics, Dalian University of Technology, Dalian 116023; |
| |
| Abstract: | An aluminum-metallic glass-aluminum sandwich panel was fabricated by explosive welding technique and its property against shaped charge jet penetration was studied experimentally and numerically.Considering the small dimension of the sandwich panel,an experimental scheme was presented for penetration experiment on small specimen(character dimension less than 50 mm);a numerical calculation scheme for simulating the experimental process was developed based on ANSYS/LS-DYNA.The experimental results indicate th... |
| |
| Keywords: | mechanics of explosive metallic glass shaped charge jet penetration |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《北京大学学报(自然科学版)》浏览原始摘要信息 |
|
点击此处可从《北京大学学报(自然科学版)》下载全文 |
|
