首页 | 本学科首页   官方微博 | 高级检索  
     检索      

过冷流动沸腾汽泡凝结变形及流场特性的数值模拟
引用本文:潘良明,谭智威.过冷流动沸腾汽泡凝结变形及流场特性的数值模拟[J].重庆大学学报(自然科学版),2012,35(6):53-57.
作者姓名:潘良明  谭智威
作者单位:重庆大学 低品位能源利用技术及系统教育部重点实验室,重庆400044;重庆大学 低品位能源利用技术及系统教育部重点实验室,重庆400044
基金项目:国家自然科学基金资助项目(50406012);中央高校基本科研业务费重点资助项目(CDJZR10145501)
摘    要:建立了过冷流动沸腾汽泡凝结质量及能量传递模型,采用VOF多相流模型,对汽泡凝结过程进行了数值模拟。得到了不同工况下汽泡变形过程及其内部和周围流场变化,与前人研究结果吻合较好。结果表明:汽泡凝结过程中,其形貌将发生变化且受汽泡初始直径和过冷度等影响显著。过冷度越高或初始直径越大,汽泡变形越剧烈。当初始直径和过冷度都达到一定数值时,汽泡在凝结后期将发生破裂。

关 键 词:过冷流动沸腾  汽泡凝结变形  VOF模型

Numerical investigation of bubble deformation and flow field characteristics of subcooled boiling during condensation
PAN Liang ming and TAN Zhi wei.Numerical investigation of bubble deformation and flow field characteristics of subcooled boiling during condensation[J].Journal of Chongqing University(Natural Science Edition),2012,35(6):53-57.
Authors:PAN Liang ming and TAN Zhi wei
Institution:Key Laboratory of Low grade Energy Utilization Technologies and Systems, Ministry of Education, Chongqing University, Chongqing 400044, P.R.China;Key Laboratory of Low grade Energy Utilization Technologies and Systems, Ministry of Education, Chongqing University, Chongqing 400044, P.R.China
Abstract:The mass and energy transfer model of bubble condensation in subcooled boiling flow is established. The bubble condensation process is numerically simulated by VOF model. The bubble deformation and flow field characteristics are also obtained. The result agrees well with previous results. The results indicate that bubble shapes will change and are significantly influenced by the bubble initial diameter and the subcooled degree in condensation process. The bubble deformation will appear more sharply with increasing subcooled degree or initial diameter. The bubble will break when the subcooled degree and initial diameter reach a certain value at later phase.
Keywords:
点击此处可从《重庆大学学报(自然科学版)》浏览原始摘要信息
点击此处可从《重庆大学学报(自然科学版)》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号