| 钛负载Mo_7O_(24)~(6-)插层Si-Mg/Al-LDO的制备及其催化性能 |
| |
| 引用本文： | 周建成,李乃旭,吴东方,宋建超,张照明.钛负载Mo_7O_(24)~(6-)插层Si-Mg/Al-LDO的制备及其催化性能[J].东南大学学报(自然科学版),2009,39(6). |
| |
| 作者姓名： | 周建成 李乃旭 吴东方 宋建超 张照明 |
| |
| 作者单位： | 1. 东南大学化学化丁学院,南京,211189
2. 东营市源聚生物制品有限公司,东营,257091 |
| |
| 摘 要： | 通过共沉淀、离子交换等过程制备含硅Mo_7O_(24)~(6-)Mg/Al型层状双金属氢氧化物(LDHs),将此前体在773 K焙烧4 h后,在钛酸四丁酯甲苯溶液中加热回流4～6 h,得到钛负载Mo_7O_(24)~(6-)插层Si-Mg/Al-LDO催化剂,并将此催化剂用于丙烯环氧化制备环氧丙烷反应中.通过X射线衍射、红外光谱和扫描电子显微镜等对水滑石焙烧前后样品及最终催化剂进行分析.结果表明:钼酸根插层水滑石前体,晶相单一,结晶度高;硅溶胶负载对水滑石晶体结构没有破坏;硅-钛原子合理匹配,分散在催化剂中,具有良好的环氧化催化性能,其中(3)Ti-Mo_7O_(24)~(6-)(2.68)Si-Mg/Al-LDO的催化活性最高,双氧水的转化率达到85.16%,环氧丙烷的选择性达到78.39%.
|
| 关 键 词： | 层状双金属氢氧化物 插层水滑石 负载钛 环氧丙烷 |
Preparation and catalytic activities of the supported titanium Mo_7O_(24)~(6-)-Si-Mg/Al-LDO |
| |
| Zhou Jiancheng Li Naixu Wu Dongfang Song Jianchao Zhang Zhaoming.Preparation and catalytic activities of the supported titanium Mo_7O_(24)~(6-)-Si-Mg/Al-LDO[J].Journal of Southeast University(Natural Science Edition),2009,39(6). |
| |
| Authors: | Zhou Jiancheng Li Naixu Wu Dongfang Song Jianchao Zhang Zhaoming |
| |
| Institution: | Zhou Jiancheng1 Li Naixu1 Wu Dongfang1 Song Jianchao1 Zhang Zhaoming2(1 School of Chemistry , Chemical Engineering,Southeast University,Nanjing 211189,China)(2 Dongying City Yuanju Biology Products Co.,Ltd.,Dongying 257091,China) |
| |
| Abstract: | Mo7O6-24-Si-Mg/Al layered double hydroxides(LDHs) were synthesized by the processes of coprecipitation,ion-exchange,etc.Then tetrabutyl titanate dissolved in toluene interacted with the LDHs calcined at 773 K for 4 h to produce Ti-Mo7O6-24-Si-Mg/Al-LDO. The catalyst precursors and resulting catalyst samples were characterized by XRD(X-ray diffraction),FT-IR(Fourier transform infrared) and SEM(scanning electron microscope).It is shown that the intercalated hydrotalcite precursors have single crystal phase wi... |
| |
| Keywords: | layered double hydroxide intercalated hydrotalcite supported titanium propylene oxide |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
