| 不锈钢切削参数优化 |
| |
| 引用本文： | 林峰.不锈钢切削参数优化[J].暨南大学学报,2007,28(3):276-278. |
| |
| 作者姓名： | 林峰 |
| |
| 作者单位： | 广东技术师范学院,广东,广州,510635 |
| |
| 摘 要： | 采用正交试验研究涂层刀具切削不锈钢材料的参数优化组合,分析了不同切削参数对加工表面质量的影响规律,得出了不锈钢较佳车削加工参数. 最后通过实验验证了其正确性.
|
| 关 键 词： | 不锈钢 优化 切削参数 表面粗糙度 |
| 文章编号： | 1000-9965（2007）03-0276-03 |
| 修稿时间： | 2007-04-01 |
Determination of optimum cutting parameters during machining of stainless steel |
| |
| LIN Feng.Determination of optimum cutting parameters during machining of stainless steel[J].Journal of Jinan University(Natural Science & Medicine Edition),2007,28(3):276-278. |
| |
| Authors: | LIN Feng |
| |
| Institution: | Guangdong Polytechnic Normal University, Guangdong 510635, China |
| |
| Abstract: | In this study determination of the optimum cutting speed using the Taguchi method, has been aimed when turning stainless steel using cemented carbide cutting tools. The effect machining parameters on the surface quality is analyzed and the optimal machining parameters for achieving the desired surface roughness is obtained. Experimental results are provided to confirm the effectiveness of this approach. |
| |
| Keywords: | stainless steel optimization machining parameters surface roughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
