| BGA封装中含Bi,Ni的无铅焊球剪切强度研究 |
| |
| 引用本文： | 华彤,王珺,俞宏坤,肖斐. BGA封装中含Bi,Ni的无铅焊球剪切强度研究[J]. 复旦学报(自然科学版), 2006, 45(4): 489-494 |
| |
| 作者姓名： | 华彤 王珺 俞宏坤 肖斐 |
| |
| 作者单位： | 复旦大学,材料科学系,上海,200433 |
| |
| 基金项目： | APEC科技产业合作基金 |
| |
| 摘 要： | 对Sn/3.5Ag/0.7Cu,Sn/3Ag/3Bi/0.5Cu和Sn/3Ag/3Bi/0.5Cu/0.1Ni三种BGA无铅焊球(0.76 mm)经不同热循环后,在FR-4基板上的剪切强度进行了测量.采用SEM和EDX对样品截面进行观察和元素分析.数据表明,Bi的掺入提高了焊料的润湿性及焊接强度,并减缓了IMC的生长速度;焊料中加入微量Ni可有效减小焊点下金属上Ni镀层的耗穿速度,抑制了焊球经热循环后焊接强度的下降.
|
| 关 键 词： | 半导体工艺 无铅焊料 球栅阵列封装 封装可靠性 金属间化合物 |
| 文章编号： | 0427-7104（2006）04-0489-06 |
| 收稿时间： | 2005-12-29 |
| 修稿时间： | 2005-12-29 |
Shear Strength of Lead-Free Solder Ball Doped with Bi and Ni in BGA Packaging |
| |
| HUA Tong,WANG Jun,YU Hong-Kun,XIAO Fei. Shear Strength of Lead-Free Solder Ball Doped with Bi and Ni in BGA Packaging[J]. Journal of Fudan University(Natural Science), 2006, 45(4): 489-494 |
| |
| Authors: | HUA Tong WANG Jun YU Hong-Kun XIAO Fei |
| |
| Affiliation: | Department of Materials Science, Fudan University, Shanghai 200433, China |
| |
| Abstract: | Shear strength of three kinds of BGA solder joints on FR-4 board with Cu pads is studied.The lead-free solders of Sn/3.5Ag/0.7Cu,Sn/3Ag/3Bi/0.5Cu and Sn/3Ag/3Bi/0.5Cu/0.1Ni are used to make the BGA balls which are mounted on FR-4 board by solder reflow.After the thermal cycles,ball shear test was performed.In order to observe the microstructure and composition of IMC at interface,SEM and EDX are used to analyze of the samples.The experiment data show that Bi enhances the strength of solder joints by reducing the growth rate of IMC at the interface between solder and Cu pads;while Ni is effective to suppress the decreasing of the solder joints strength by depressing the consumption of the plated Ni on UBM. |
| |
| Keywords: | semiconductor process lead-free solder BGA package reliability IMC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
